J5KE F 0 Posted October 12, 2010 Report Share Posted October 12, 2010 Well some may remember my last Mk2, A Capri Green fairly tidy shell with a monster R32 rotrexed hormone implant under the hood.. She was totally off the rails and although at nearly 500Brake, was powerful but a loose cannon as far as power delivery counted.The Quaiffe LSD did sweet FA and driving in the wet was impossible Although all the above seem negatives, I cannot deny it was huge fun that was until several Bosch plugs at 1 week old decided to wreck over a years worth of hard work.Since the detonation at fighting torque 09' the engine,was split, charger sold, gearbox sold and the front end transmission and brakes where used to convert the caddy van to a vr, the interior was also sold to fund the caddy conversion.With the old mk2 sitting up on bricks, no bonnet, bootlid, interior or doors, just a bare shell, my mind started ticking.....Ok, well some of u know of a rather nicely put together mk3 4motion conversion..Some say before Paul built this, he spent several long hard months working on a mk2 shell with a good mate of his Dom, they spent so long doing everything properly crossing the t's and dotting the i's he perfected the art of converting vw's to 4wd so much so he knew where he could now cut the corners on the mk3 version!Not only did he convert the thing to take the Haldex system the following was already featured on the shell when I stole it from him:A functional bios control was installed, giving full control over the 4wd power deliveryRelocation of the Battery to the back seat areaStripped interiorRoll CageRear strutPowerflex bushes all roundBig brake conversion& deleted sunroofRallye petrol tank and boot floor panAnd from this, a new breed of mk2 is evolving..Originally I was going back to the Charged 32' but due to struggling work and money being tight, I have decided to use the 12valve vr lump, mainly due to the fact that they're cheap, and secondly due to the fact that I have 3 complete units available in the workshop! Not to mention, although I loved the power and sheer fact the old engine was a 3.2 audi engine, it was an expensive repair that couldn't be justified. Oh and then there's the noise you get from the 12valve, I missed that more than anything else..Taking this into account, the 4wd power delivery and the fact that 400brake and 350lbs are easily acheivable through a decent stock VR engine, combined with the weight shaving properties of the mk2 shell A new breed of Mk2 4motion has evolved.The us spec wings, bonnet and smooth bootlid remain as before but some more changes are going to take place over the next few months,,The shell is back from having all the prep work done, a new coat of paint and is now just sitting.. waiting..I'll update as we progress from now on in!A few teasers to wet ur whistles.. Link to post Share on other sites
Ben Seabrook 4 Posted October 12, 2010 Report Share Posted October 12, 2010 ha ha ha ha you crazy mother !!!!!! I love it :) :) Link to post Share on other sites
cabrioman 6 Posted October 12, 2010 Report Share Posted October 12, 2010 oh another rusty mk2 for us mk3 boys to show up at the stip .... lol Link to post Share on other sites
J5KE F 0 Posted October 12, 2010 Author Report Share Posted October 12, 2010 Easy Tony.. that be fighting talk.. (not to be confused with fighting torque ) Link to post Share on other sites
cabrioman 6 Posted October 12, 2010 Report Share Posted October 12, 2010 Easy Tony.. that be fighting talk.. (not to be confused with fighting torque )bring on 2011 i say .... lol Link to post Share on other sites
VR6Pete 1,455 Posted October 12, 2010 Report Share Posted October 12, 2010 tidy - how much you pay for that paint job? Link to post Share on other sites
Ben Seabrook 4 Posted October 12, 2010 Report Share Posted October 12, 2010 I presume this one will be a turbo mate ? Link to post Share on other sites
J5KE F 0 Posted October 12, 2010 Author Report Share Posted October 12, 2010 Pete, paint job was partly paid by refurb on a pool works out at about £1500 on painting and £800 on prep work.. was fairly high as the roof was shot where the sunroof had been welded up..Ben, U know me! But I aint tellin just yet.. It WILL be 12valve tho Link to post Share on other sites
Ben Seabrook 4 Posted October 12, 2010 Report Share Posted October 12, 2010 blooming secret keeping people !!!!!!!!! bah humbug to the lot of you !!!! :( Link to post Share on other sites
J5KE F 0 Posted October 12, 2010 Author Report Share Posted October 12, 2010 No secrets just decisions to be made..Turbos are good, chargers are better but i kind of love the sound of the n/a vr.. Link to post Share on other sites
legvw 0 Posted October 13, 2010 Report Share Posted October 13, 2010 Nice work fella!At least its going to have a proper engine in it now! ;-)I can't wait to see how this beast is going to turn out.You the man Jake :-) Link to post Share on other sites
spadam 7 Posted October 13, 2010 Report Share Posted October 13, 2010 Looks like an intresting project cant wait to see this Link to post Share on other sites
b19drg 0 Posted October 13, 2010 Report Share Posted October 13, 2010 Good work as always mate, look forward to seeing the progress Link to post Share on other sites
The Monk 50 Posted October 13, 2010 Report Share Posted October 13, 2010 Jake, good luck matey. I'm looking forward to this. Link to post Share on other sites
VR6Nat 9 Posted October 13, 2010 Report Share Posted October 13, 2010 awesome project as always mate... look forward to seeing the end result! :) Link to post Share on other sites
hvr6 88 Posted October 13, 2010 Report Share Posted October 13, 2010 looking good very exciting :-) Link to post Share on other sites
matty.vrt 120 Posted October 13, 2010 Report Share Posted October 13, 2010 keep us posted this looks to be gooood. Link to post Share on other sites
J5KE F 0 Posted October 16, 2010 Author Report Share Posted October 16, 2010 Cheers guys,Went up to see it this morning and may have an alternative solution to powering now!got sum serious work to do tho! Link to post Share on other sites
b19drg 0 Posted October 16, 2010 Report Share Posted October 16, 2010 Flux capacitor ?? Link to post Share on other sites
legvw 0 Posted October 16, 2010 Report Share Posted October 16, 2010 Flux capacitor ?? PMSL! Looking good though Jake.If you need 'a hand', i've got 1 spare mate ;-) Link to post Share on other sites
J5KE F 0 Posted October 16, 2010 Author Report Share Posted October 16, 2010 Flux capacitors are far too unreliable dude!I'm reakoning on something similar to an approach to FTL travel based on either Alcubierre Drive Theory or Extended Heim Theory..Or Warp drive in english! Link to post Share on other sites
AJmk2 2 Posted October 23, 2010 Report Share Posted October 23, 2010 Looking forward to seeing the TDI v6 lump thrown in should be good. Link to post Share on other sites
J5KE F 0 Posted October 23, 2010 Author Report Share Posted October 23, 2010 Hey alex, how u doing..? I'm saving that engine for the mk2 van project next year I'm currently taking a short breakFrom this project whilst the vento is being tweeked and ideas are being accumilated for the engine.Think the team has a plan of attack now and just need finer details like component lists produced Hows urs running.. Anything new? Link to post Share on other sites
AJmk2 2 Posted October 23, 2010 Report Share Posted October 23, 2010 Hey alex' date=' how u doing..? I'm saving that engine for the mk2 van project next year I'm currently taking a short breakFrom this project whilst the vento is being tweeked and ideas are being accumilated for the engine.Think the team has a plan of attack now and just need finer details like component lists produced Hows urs running.. Anything new?[/quote']Destroyed my old clutch but got a new one,a rear spring collapsed, destroyed my oil drain but all sorted then turbo shaft split in 2 , but a road of recovery lays ahead hoping to have it back on road in next few months for track day.Go for a eaton m112 on the 12v. Flows enough for 500bhp with instant throttle response, you know you want to! Link to post Share on other sites
Damo666 0 Posted October 24, 2010 Report Share Posted October 24, 2010 Wow 8-) this is gonna be frickin awesome ;-) Link to post Share on other sites
Recommended Posts