Jump to content

Recommended Posts

I cant get a temp reading on my dash . I have change the thremostat i have replace the blue 2 pin sensor and the 4 pin yellow sensor. Which they gave me a brown one but i told them thats for air con models but he asured me it was the right one. Fitted the new sensor and my fans kicked in all the time. Took it back and he said you will have to go to vw. I rang them up they said we are not listing a 4 pin yellow part no 7019193698.

So i now have a black 4 pin with a blue band around it and yes this one does'nt work.

Does any one know which part no i need to replace the yellow 4 pin sensor.

Thanks

Link to post
Share on other sites

Update i finaly got vag com to work with my car . I had a low voltage drop. Cleared the fault and fans are all working, just my dash is at fault at the mo but i will be pulling them out to see if i can find something wrong with them. Hope this helps some people out for future threads

Link to post
Share on other sites
  • 2 weeks later...
  • 2 weeks later...

i don't know why they are struggling for you..

the 4-pin sensor does the dash temp and aux water pump.

part no 701 919 369 D SHOULD have sorted it for you, unless you have further issues somewhere. the replacement switches are no longer yellow, it should be black with a blue band.

and you are quite correct - the brown one is air-con only..

Link to post
Share on other sites

finaly got my fans working,it turned out to be 2 of the wires on the brown sensor clip were touching vag spotted the problem also changed the sensor,the fans kick in and turn on & off fine now but i am pretty certain its the stage 3 kicking in,and the temp is reading half way 90, does anyone know of some more checks i can do i changed the fan module and i am asuming it works or is stage 3 nothing to do with it?

Link to post
Share on other sites
×
×
  • Create New...