fritzenberg 3 Posted February 7, 2005 Report Share Posted February 7, 2005 i`ve just got my eibach lowering springs in (30mm drop) but before i get them fitted,do i need a sump gaurd or willit be ok with that drop?(speed bumps ect) Link to post Share on other sites
binliner 0 Posted February 7, 2005 Report Share Posted February 7, 2005 you'll be fine... 30 mm is hardly noticeable tbh Link to post Share on other sites
stu h 0 Posted February 7, 2005 Report Share Posted February 7, 2005 would be wise to change bumpstops and top mounts at the same time (if you havenet already thought of it) Link to post Share on other sites
SankysVR6 1 Posted February 8, 2005 Report Share Posted February 8, 2005 do you need to cut 20mm off the front and rear bump stops or just the rears, wuth this setup. Link to post Share on other sites
dubloke 4 Posted February 8, 2005 Report Share Posted February 8, 2005 the bumpstops should be fine with such a small drop. as justin says it will more than likely be hardly noticable as the suspension will already have sagged to a degree anyway and will look slightly lower than when new now! it will handle slightly better , but tbh you'd be better off buying a matched kit of shocks/springs, as they are quite reasonable to pick up and you'll have to dismantle the struts anyway to fit just springs! Link to post Share on other sites
Recommended Posts