makster28 0 Posted February 11, 2011 Report Share Posted February 11, 2011 finaly got my replacment module off ebay for a tenner lol and it works but still have no fans i tried bridgin the conections in the rad conerctor the usual way and still nothing just blows the fuse so i let the car heat up at a stand still to 80 90 degrees to see if the fans would kick in then what seemed like the moment the fans were guna kick in the fuse poped,guna try new rad sensor tomoz but cant see it making any diffrence as i am getting nothing on the rad test unless i run 2 wires from fans to battery then they work,its driving me up the wall wish i adent of got the dam thing now -------------------------------------------------------------------------------- Link to post Share on other sites
legvw 0 Posted February 11, 2011 Report Share Posted February 11, 2011 Have you checked the wiring as it sounds like something is causing a dead short when the fan is tried to be switched on. Link to post Share on other sites
craggsy 91 Posted February 11, 2011 Report Share Posted February 11, 2011 Gotta have a short somewhere then. As Paul syas check the wiring Link to post Share on other sites
makster28 0 Posted February 11, 2011 Author Report Share Posted February 11, 2011 checked all the wires to my knowledge including under battery tray etc to module its all in thick covering so should be ok.my last hope is chanheing rad sensor tomoz gutt feeling it aint guna make any diffrence,i spoke to the guy i bought it off 3 weeks ago he rekons he had know probs but he would say that,i will mention the oil temp sensor is still broke but this wont have any effect with the rads will it?cheers Link to post Share on other sites
VR6Pete 1,455 Posted February 11, 2011 Report Share Posted February 11, 2011 What amp fuse does your module have installed? Link to post Share on other sites
makster28 0 Posted February 12, 2011 Author Report Share Posted February 12, 2011 20 amp 5 amp m8.spoke to machanic he rekons fan motor i told him i got the fans working with 2 bits of wire to battery and they work,he still thinks the motor cant see it tho,i found some copper wire exposed on the fan conector but it isnt damaged just the plastic coating has come away a bit,how would i know if the fan module i bought isnt also knackered?cheers Link to post Share on other sites
makster28 0 Posted February 12, 2011 Author Report Share Posted February 12, 2011 had a few people saying the fan motor could be faulty and causing fuse to blow even tho i had them spinning just jumped up to battery with 2 wires? Link to post Share on other sites
makster28 0 Posted February 16, 2011 Author Report Share Posted February 16, 2011 srill cant get the fans to work iv tried the 30 amp fuse ble straight away,i guess the fans will never work had it with this piece of s,,,t Link to post Share on other sites
Recommended Posts