ASHLEYG 4 Posted March 27, 2011 Report Share Posted March 27, 2011 Just been looking on Ebay at hockey pucks to raise the engine in My MK2 VR. There's loads to choose from, different colours etc.Do I need to use a specific type? Are they all the same hardness? Oh and any size?Cheers, Ash Link to post Share on other sites
squid1 0 Posted March 28, 2011 Report Share Posted March 28, 2011 [link]http://cgi.ebay.co.uk/NEW-ICE-HOCKEY-PUCK-any-quantity-prompt-despatch-/190516986034?pt=UK_Ice_Hockey&hash=item2c5bb280b2these are the ones i used on mine Link to post Share on other sites
ASHLEYG 4 Posted April 4, 2011 Author Report Share Posted April 4, 2011 Cheers mate, bought 3 of them and arrived today!I've drilled the centre out, has anyone made a sleeve to go through the hole or can you just bolt them down tight? Just a bit worried that they'll squash or come loose without some sory of sleeve!Oh and does anyone know what size and thread pitch bolts to order?Cheers, Ash Link to post Share on other sites
ian_GTI 0 Posted April 4, 2011 Report Share Posted April 4, 2011 There's a how to guide on e38 with all the sizes etcI just took mine off as it lifted the engine and made the air intake push on the wing and on the strut, when I took the charger off it was a nightmare to line it all back up Link to post Share on other sites
squid1 0 Posted April 14, 2011 Report Share Posted April 14, 2011 i didnt use a sleave just bolted it down....... n i didnt have any trouble with the air filter on the strut brace.... Link to post Share on other sites
ASHLEYG 4 Posted April 15, 2011 Author Report Share Posted April 15, 2011 Now fitted! Drilled a larger than needed hole and inserted a sleeve slightly shorter so now it bolts up tight! Link to post Share on other sites
Recommended Posts