CARLOS_VR6 0 Posted May 16, 2011 Report Share Posted May 16, 2011 I have a vr6 on a 97 yr...Since having the car i have had problems with locking and unlocking via remote. I believe its a factory fit (conlog)Really need a new Fob- Ive looked everywhere can any1 help.Its a single button fob which can be plugged into the glove box... Link to post Share on other sites
bungy 2 Posted May 16, 2011 Report Share Posted May 16, 2011 Picture? Link to post Share on other sites
CARLOS_VR6 0 Posted May 17, 2011 Author Report Share Posted May 17, 2011 By carlos_vr6 at 2011-05-17By carlos_vr6 at 2011-05-17cheers Link to post Share on other sites
VR6Pete 1,455 Posted May 17, 2011 Report Share Posted May 17, 2011 I think VW dealers can re-code the fobs. Link to post Share on other sites
CARLOS_VR6 0 Posted May 17, 2011 Author Report Share Posted May 17, 2011 Hi.Its not it wont code. it wont lock and unlock everytime. Espicially when car is cold. very odd. Link to post Share on other sites
jims13 6 Posted May 17, 2011 Report Share Posted May 17, 2011 sound more like icing in the vacum pipes.. or a lazy central locking pump Link to post Share on other sites
CARLOS_VR6 0 Posted May 18, 2011 Author Report Share Posted May 18, 2011 if it was the pump surely it would struggle when using the key!!! Link to post Share on other sites
KB 0 Posted July 14, 2011 Report Share Posted July 14, 2011 Hi there did you manage to sort your problem out ?.. I had a problem like that with the same fob . I had to put small bits of cardboard at either end of were the batterys fit to push the terminals closer to the batterys and also wrap the batterys in sticky tape to make a tube. My fob is very worne and everytime i touched the fob the batterys popped out and moved. I also had to make a new rubber button because there is a small part that moves. I have searched everywere for a new fob including Vw but no luck. Hope this may help.. Link to post Share on other sites
Recommended Posts