ryanmac 0 Posted June 11, 2011 Report Share Posted June 11, 2011 Hi allI have finished rewiring behind the dashboard and the car won't start....The car will turn over but not start. Also I can hear and feel the fuel pump relay click over and I get a voltage reading at one of the wires down the fuel pump side but I don't hear it prime or run when cranking. I also get no fuel in the engine bay as another indication that its not priming.Has anyone any suggestions? I am going to check I do get a voltage at the fuel pump, injectors, coil, and throttle body. Is there anywhere else I should check....And where are the earth points for all these bits in case it is a bad earth. Link to post Share on other sites
mawrick 0 Posted June 12, 2011 Report Share Posted June 12, 2011 IIRC if the engine speed sensor is failing it won't allow for fuel delivery.....(it's the sensor in the front - low on engine (around oil cooler area).....I think also the hall sender in the distributor (if not a coilpack model) have something to do with beiing "allowed" to send fuel).Beware though that the Engine speed sensor will throw an error if the car is scanned without running - even if it works..... Link to post Share on other sites
Recommended Posts