filtee 0 Posted June 21, 2011 Report Share Posted June 21, 2011 As above, ive got a bit of welding needs doing on my 93 vr6. 2 holes in floor, maybe sills need doing and inside fuel filler is rotten. I could do with someone in the know having a look. Im in Chorley Lancashire Link to post Share on other sites
filtee 0 Posted June 21, 2011 Author Report Share Posted June 21, 2011 Please Link to post Share on other sites
tjsmudger 2 Posted June 21, 2011 Report Share Posted June 21, 2011 Ask on the Unphased website, maybe someone on there could help also! Might be worth a punt! Link to post Share on other sites
filtee 0 Posted June 21, 2011 Author Report Share Posted June 21, 2011 Will do. cheers Link to post Share on other sites
tjsmudger 2 Posted June 21, 2011 Report Share Posted June 21, 2011 Your welcome Link to post Share on other sites
filtee 0 Posted June 22, 2011 Author Report Share Posted June 22, 2011 bump Link to post Share on other sites
nathanvr 0 Posted July 24, 2011 Report Share Posted July 24, 2011 did this get sorted for you mate? Link to post Share on other sites
filtee 0 Posted July 25, 2011 Author Report Share Posted July 25, 2011 Ish. I found a lad who works with my mate. Hes an apprentice welder. Anyway, hes cut the bits out of the floor and is meant to be welding some pieces in this week. The sills need sorting out as theyre nackered at the front jacking points. Id rather get these done properly at a bodyshop or by someone thats done them before. Link to post Share on other sites
Rustyman 0 Posted November 30, 2011 Report Share Posted November 30, 2011 I'm learning by doing my own ! i just borrowed a gas less arc welder and mask and am making up the floor pieces so far i have made my own seat rails and welded them up !!!! it's goo fun and satisfying knowing i can do it on my car now ....Good luck Link to post Share on other sites
filtee 0 Posted November 30, 2011 Author Report Share Posted November 30, 2011 This thread is over 4 months old now mate. Got rid of that vr. Got another, same colour but no holes in floor. Jacking points are pooped though. Poop Link to post Share on other sites
Rustyman 0 Posted December 4, 2011 Report Share Posted December 4, 2011 Sorry my bad .. been a while since i posted didn't read it properly... Link to post Share on other sites
Recommended Posts