Jump to content

Recommended Posts

hi guys, just want some advice realy, i have the chance to get a 99 ford galaxy vr6 auto for £150.00 localy, looking on the net etc these engines are VW'S vr6! are they identical ? also is the ford galaxys 24v v6 the same as the mk4's 2.8 4mo motor? im just thinking this galaxy would make a great spare motor and i dont have to travel to get it!! cheers.

Link to post
Share on other sites

To be fair I have had people come to me for engines from a golf to fit their Sharan or Galaxy and I have offered to take their engine in exchange! But side by side they are different..... The cylinder head has more coolant hoses and connections on the people carriers than the golf!

Link to post
Share on other sites

ok scrap the galaxy, an hour later a mk3 golf vr6 came my way for £200! the guy had it advertised as possible clutch problem as it didnt drive,my m8 towed me to my works carpark ,i had a proper looksy and found that the driveshaft had comeloose and as a result he had bent and sheered the bolts off the flange,not a problem for me as i have a brand new bolt set which i didnt use on the corrado! fitted the driveshaft back with new bolts about 2 hours ago, just need to replace the fuel hoses in the bay as there perished and spraying petrol everywhere! he must of been useing it like that!

mk3backrightshot.jpg

mk3DSdisconnected.jpg

mk3bentdsbolts.jpg

mk3BAY.jpg

think iv got myself a little bargain! realy needs an oil change and the oil cooler seals doing which i'll do on thursday,right can someone shed some light on this, this model has a coilpack does this make it obd2? cheers

Link to post
Share on other sites

ok scrap the galaxy' date=' an hour later a mk3 golf vr6 came my way for £200! the guy had it advertised as possible clutch problem as it didnt drive,my m8 towed me to my works carpark ,i had a proper looksy and found that the driveshaft had comeloose and as a result he had bent and sheered the bolts off the flange,not a problem for me as i have a brand new bolt set which i didnt use on the corrado! fitted the driveshaft back with new bolts about 2 hours ago, just need to replace the fuel hoses in the bay as there perished and spraying petrol everywhere! he must of been useing it like that!

[img']http://i1206.photobucket.com/albums/bb441/chris2fer666/mk3backrightshot.jpg

mk3DSdisconnected.jpg

mk3bentdsbolts.jpg

mk3BAY.jpg

think iv got myself a little bargain! realy needs an oil change and the oil cooler seals doing which i'll do on thursday,right can someone shed some light on this, this model has a coilpack does this make it obd2? cheers

that is so lucky , proves that it is worth taking a look at things first before writing them off. quite jeaulous now!

Link to post
Share on other sites

haha yea saw it on facebook guernsey classifieds,i was in there like swim wear ;)

just finished off the fuel lines so its now driveable, needs 2 new tyres, oil cooler seals and an oil change, at the mo the oil level is dangerously low,and the rear disc pads need doing and the exhaust is getting changed as its so so quiet you can barely hear it, doesnt even sound like a vr6 imo.might just sort out the problems and give it a good clean and put it up for £1000 o.n.o as i dont realy need another car but i could hardly turn down a vr6 for £200

Link to post
Share on other sites
×
×
  • Create New...