carl7777 0 Posted August 15, 2011 Report Share Posted August 15, 2011 ive replaced plugs leads dizzy cap on my 93vr6 but theres still a lack of bottom end power,ive come to the conclusion my cam sensor needs cleaning,can anybody tell me its location,im guessing i clean it with carb cleaner,cheers,carl Link to post Share on other sites
bungy 2 Posted August 15, 2011 Report Share Posted August 15, 2011 At a guess I'd say it was next to the cam... Link to post Share on other sites
carl7777 0 Posted August 15, 2011 Author Report Share Posted August 15, 2011 thanks,that sounds logical,ill have a look in a moment Link to post Share on other sites
bungy 2 Posted August 15, 2011 Report Share Posted August 15, 2011 I think this is right for yours. The blue arrow. Link to post Share on other sites
spadam 7 Posted August 15, 2011 Report Share Posted August 15, 2011 Yes as above remove your coilpack and unplug the conector in blue. Then undo 2 allen key bolts and slowly remove making sure the seal does not fall into the engine. Clean and refit simples. Link to post Share on other sites
carl7777 0 Posted August 15, 2011 Author Report Share Posted August 15, 2011 mine has a dizzy not a coil pack Link to post Share on other sites
thegoth 5 Posted August 15, 2011 Report Share Posted August 15, 2011 Another dizzy!! The seem to all be crawling out of the wood work with problems. Just fixed a misfire in mine.Anyway...In which case the equivilant sensor is in the dizzy and shouldn't require cleaning as there's no oily mess in there. Link to post Share on other sites
carl7777 0 Posted August 15, 2011 Author Report Share Posted August 15, 2011 the dizzys dont like the damp weather i guess Link to post Share on other sites
Recommended Posts