Jump to content

Black 3 door VR6 with Vortech V9F


Recommended Posts

Hello Everyone.

Here is my firtst VR6, This picture was taken after 1 week of ownership.

301194_2266885485667_1654453045_2201421_289333841_n.jpg

Ive recently had some time off work and have given it a winter detail.

DSCF06701.jpg

DSCF06681.jpg

DSCF06671.jpg

Ive also changed the lights up front for Joey items, with standard tinted indicators and fogs. Ive also had another bumper smoothed, painted and fitted a new VR6 spillter (as old bumper and splitter were damaged).

DSCF06711.jpg

The next stage is more power with a Stage 1 V9F supercharger that ive bought from VRTDan.

I may fit this befor winter, but am not sure yet.

Link to post
Share on other sites
  • 3 weeks later...
  • Replies 73
  • Created
  • Last Reply

Top Posters In This Topic

So last night and today ive mostly been doing this.

316079_10150413076449287_602204286_8069143_450467021_n.jpg

Having a few teething problems. Main one being the Ecu is only seeing 74% throttle when its at WOT (wide open throttle). And were having problems trying carry out a TBA (throttle body adaption).

Apart from that its ok, but just not as fast as i was hoping. Guessing that thats because im missing 26% of the possible avalible power,

Going to carry out some more tests tomorrow.

Link to post
Share on other sites

I replaced the spark plugs last night with Bosh FR7KPP33+ recomended by Vince @ Stealth.

The old plugs were a litte worn :P

385772_2534700740881_1654453045_2363852_548924495_n.jpg

Ive also since managed to adapt the Throttle body.

Unfortunatly the car is still a bit jerky when cold. But absolutly perfect when its warmed up. Ive reinstalled the 3bar fpr which may have helped a bit,

Any Suggestions Welcome.

Link to post
Share on other sites

I fitted a new Lambda sensor when i fitted the de-cat pipe.

Its only lumpy in the mornings when the car is cold, but also a bit funny going between idle when on the move once warmed up.

Its a Stage 2 Kit with red top Injectors.

Thanks for the help.

Link to post
Share on other sites

×
×
  • Create New...