joeboy 1 Posted November 28, 2011 Report Share Posted November 28, 2011 Mornin peeps, yesterday I noticed a rattling sound comin from the engine, then when havin a look in the engine bay I noticed wat I think is a pulley , it has abelt going round it, the pulley has abit of play in it, I have a vid on YouTube it's only about 14 seconds long , please could I have some help on what to do asap as this is my every day car and will be lost with out it. Oh and it's a 95 mk3 golf vr6. Link to post Share on other sites
cbmotorsport 0 Posted November 29, 2011 Report Share Posted November 29, 2011 That is your water pump pulley, remove centre front engine mount and jack engine up slightly, check pulley bolts are tight, if they are then your pump is knackered. Do not leave it like this. It will cause bigger problems Link to post Share on other sites
rodney 17 Posted November 30, 2011 Report Share Posted November 30, 2011 yup as above.... It is a pig to get out...... you have to raise enough to clear the engine bay/leg down there... I would suggest a couple of mounts need undoing... it made life easier for the lift and not so much strain on them whilst you're workin on it..One extra point is give yourself as much acces as possible as they NEVER want to come out and be free. Link to post Share on other sites
Vw_owner 1 Posted December 1, 2011 Report Share Posted December 1, 2011 are they realy that bad to get out? i want to do mine at some point even though at the mo its ok, dont wanna start it then end up snapping a bolt or cracking a flange and basicaly makeing it worse.. Link to post Share on other sites
joeboy 1 Posted December 1, 2011 Author Report Share Posted December 1, 2011 Cheers lads got one order off the bay. Link to post Share on other sites
Recommended Posts