alexbmx 0 Posted November 28, 2011 Report Share Posted November 28, 2011 right the weekend i shall be collecting a new engine for my car as the one in mine is getting tired after 189k. now my car is a j plate vr using a dizzy engine so am i right in thinking that this is an obd1?the car i shall be removing the new engine from is an obd2 engine, could someone give me a list of this i am going to need to strip from the car to convert my car over to obd2? all help much appreciated Link to post Share on other sites
spadam 7 Posted November 28, 2011 Report Share Posted November 28, 2011 Sure brent or pete will be a long shortly as they have both recently done this. Link to post Share on other sites
Ben Seabrook 4 Posted November 28, 2011 Report Share Posted November 28, 2011 Yes your right yours is an obd1 mate and you need to remove swap things like throttle body maf inlet ecu and engine wiring loom from yours and swap them Link to post Share on other sites
oldmandon 1 Posted November 28, 2011 Report Share Posted November 28, 2011 EngineThrottle BodyInlet ManifoldWiring loomECU Think thats about it..........But ask Ben Seabrook think he's just done it or done it in the past, but he's bound to know, in fact ANY of our mods will know as they are all knowing when it comes to VR's....except stiggy...he just breaks them and gets the others to fix em!!!!!! Link to post Share on other sites
VR6Pete 1,455 Posted November 28, 2011 Report Share Posted November 28, 2011 Lambda, coil pack. Imob box + key coil. Be prepaired to do imob delete if you find start blocked by imob message..You will need cabin to engine loom, engine harness and MAF deffo worth going obd2 mate Link to post Share on other sites
Ben Seabrook 4 Posted November 28, 2011 Report Share Posted November 28, 2011 Are the lambda's different then ? Link to post Share on other sites
VR6Pete 1,455 Posted November 28, 2011 Report Share Posted November 28, 2011 Yep. I'm lead to believe. Well mine were diff on the corrado so swapped em. Link to post Share on other sites
alexbmx 0 Posted November 29, 2011 Author Report Share Posted November 29, 2011 cheers for all the help chaps :-d how do i go about doing this immobiliser delete then if i come across it?cheers Link to post Share on other sites
Daverse 175 Posted November 29, 2011 Report Share Posted November 29, 2011 Take it too Jim Potter, I believe he does them. or stealth Link to post Share on other sites
cbmotorsport 0 Posted November 29, 2011 Report Share Posted November 29, 2011 Just a quick pointer. You can match the new ecu to your existing key and immo box. Link to post Share on other sites
alexbmx 0 Posted November 29, 2011 Author Report Share Posted November 29, 2011 Ah I see, how do we go about doing this then? Link to post Share on other sites
Recommended Posts