h_vr6highline 2 Posted January 1, 2012 Report Share Posted January 1, 2012 hi guys and girls i got a problem with my vri left the car sitting on my driveway for couple of months, i tried to start it the other day but i wont turnover, after some research i found out that it awas the alarm, so i had a guy from a alarm comany come and take the alarm and imbolizer out, so i put a new batterey and tried to start but nothing, after speaking to a couple of people i found it was the throttle position sensor, so i cahnged and tried to start but nothing,so i need help and advice Link to post Share on other sites
russj249 2 Posted January 1, 2012 Report Share Posted January 1, 2012 You need to get it on vag com really and have the fault codes read.. it could be a lot of things.. and you could be replacing a lot of things and still not get anywhere. Link to post Share on other sites
cbmotorsport 0 Posted January 3, 2012 Report Share Posted January 3, 2012 first things first. does the engine turn over? if no. your problem lies between igntion switch and startermotor. if it DOES turn over, do you have a spark? if yes. check all plugs to make sure each one is getting a spark. if yes, check injectors are pulsing. if yes again then it will start . if no spark. make SURE your alarm was removed properly. after that, you need vag com or a qualified mechanic to come and check it. Link to post Share on other sites
Recommended Posts