Kerscher Carmona Alloys

[donkeysmonkey 0]

I'm contemplating a set of Carmona alloys 16 inch either 7.5's all round or 7.5's up front and 9inch at the back. The lip size on these things are huge and I love the clean lines they offer. After doing some homework emailing both Tunershop UK about them and emailing Kerscher directly I'm getting conflicting information. Kerscher are informing me that i will need a small 3mm spacer at the front to clear the callipers and a 15mm spacer for the 9inch ones....I'm assuming when they say this they mean the front also due to the large callipers.

Now I've had a pair of 9 inch borbet T's at the rear briefly on my car and from what i remember these with an offset of ET15 sat about 15mm outside the rear arch so to add another 15mm would be crazy. Strangly enough Tunershop UK has said that both size alloys would clear the callipers front and back. Does anybody have experience with a set of Carmona alloys either 7.5 or 9 inch that can clarify they do or dont clear the brakes on the VR6. Also what size is the outer dish on the 7.5 inch ones as again both companies tell me very different dimensions. Thanks for your help.

[CALICO 130]

I would imagine that if the company's that are supplying cant tell you the correct sizes nobody on here will be able to confirm but i would go with Tunershop and if they dont fit they would have to supply spacers for free.