shivan87 0 Posted March 15, 2012 Report Share Posted March 15, 2012 Hi i bought a vr a couple of months ago that needed some work on it to get it through an mot. one of the failures was the copper brake pipes both sides on the rear were excessively corroded. i've bought these and also replaced the flexi pipes on the calipers as these looked fairly worn, but i also need to replace the flexi pipes that goes from the rear copper line and connects to the next bit of copper. i can post pics if required, they are slightly different from the flexi's on the calipers and i am having great difficulty finding the correct ones if someone could supply a part no. or tell me what part of the brake system these pipes are specifically referred to as, that would be great. Link to post Share on other sites
Lukey. 381 Posted March 15, 2012 Report Share Posted March 15, 2012 Is it the one that connects the hard lines over the rear beam?if so looks to me like1H0611775M10 X1 X155mm long Link to post Share on other sites
shivan87 0 Posted March 29, 2012 Author Report Share Posted March 29, 2012 thanks that was the correct part number ,uch appreciated :-) however i came across another problem once it came to bleeding the brakes; the thread on the bleed screw is knackered and nowehre seems to do the bleed screws on their own, i've tried gsf, cas, etc, everyone is trying to flog me the calipers as a hole, does anyone know where i can get the bleed screws from for the rear of the car, and also the front just in case? thanks Link to post Share on other sites
Gazbarber1982 3 Posted March 30, 2012 Report Share Posted March 30, 2012 Search ebay for vw bleed screw. They sell them in packs of 4 Link to post Share on other sites
Recommended Posts