VeedubGeezer 0 Posted April 2, 2012 Report Share Posted April 2, 2012 Hi allGot a weird AC problem and wondered if anyone had any ideas. The AC was regassed just over a year ago and has been working perfectly since. Regularly used (even over winter).These past few weeks it has started only working on fan speed 1. If I switch the fan speed up to 2, 3 or 4 the AC switches off (can feel the clutch disengage) but the fan still works as it should.I've Googled the fault and not come up with much except a F*rd Escort with a similar fault, although I'm not sure how relevant the remedy would be for our systems.Thanks Aaron Link to post Share on other sites
craggsy 91 Posted April 2, 2012 Report Share Posted April 2, 2012 Resistor on the fan Link to post Share on other sites
VeedubGeezer 0 Posted April 2, 2012 Author Report Share Posted April 2, 2012 That was the suggestion for a the Ruscort. Is it a common fault on these then? I've always known the resistors to cause the fans themselves to only work on full speed when they go wrong rather than effect the AC system?Not doubting it, just curious Link to post Share on other sites
Recommended Posts