Greenv6 1 Posted June 5, 2012 Report Share Posted June 5, 2012 Thinking of a engine swap, how difficult is it swap a mk4 r32 engine into my 4motion, or a mk5 r32 engine. Link to post Share on other sites
craggsy 91 Posted June 5, 2012 Report Share Posted June 5, 2012 Mk4 id of thought is plug and play tho I know there is a few different bits. Mk5 I'm unsure of TBH Link to post Share on other sites
warby 0 Posted March 9, 2013 Report Share Posted March 9, 2013 I looked into this when my 2.8 jacked up, mk4 is plug & play, you can even use the 4mo loom (BDE) and ecu with a reflash (according to c2)Mk5 needs a mk4 r32 loom and ecu with a reflash as far as i can remember. Link to post Share on other sites
sparkz 0 Posted April 8, 2013 Report Share Posted April 8, 2013 Quite straight forward actually...I done one 2 years ago over a weekend. I've got the guide somewhere too. You need a 4 pin relay and the r32 ecu with a reflash Link to post Share on other sites
VR6Rich 3 Posted April 12, 2013 Report Share Posted April 12, 2013 Sparkz do you have this guide to hand? Attempting this very soon on the Bora. Link to post Share on other sites
Recommended Posts