Greenv6 1 Posted July 29, 2012 Report Share Posted July 29, 2012 Can anyone help. How difficult is it to change the sump. I have bought a new one as the present one is cracked. Can anyone tell me the process and if a novice could do it. Link to post Share on other sites
bungy 2 Posted July 29, 2012 Report Share Posted July 29, 2012 I just had a look at this myself recently but not done it yet. I've got to fit a turbo oil return line. Make sure you do not use too much sealant and allow it to cure properly before use. Link to post Share on other sites
Greenv6 1 Posted July 30, 2012 Author Report Share Posted July 30, 2012 Cheers mate, Link to post Share on other sites
Vw_owner 1 Posted August 11, 2012 Report Share Posted August 11, 2012 i could see this being rather tricky if done on your drive, iv recently done mine but it was off the car, i would highly recomend getting the right bit so you can use a cordless drill as there is alot of bolts to undoo, and yea clean the surfaces up very good! Link to post Share on other sites
Dent Reform 0 Posted October 2, 2012 Report Share Posted October 2, 2012 dont forget the 2 bolts up between the bell housing as you will trash the rear main if left in !!!!! Link to post Share on other sites
Recommended Posts