Rtoyer82 0 Posted August 10, 2012 Report Share Posted August 10, 2012 Hi everyone. Ive been intouch with a reputable silicone hose manufacturer who are willing to manufacture an intake pipe for both OBD1 and OBD2, with or without the 1 or 2 spouts. Ive reassured them that there should be plenty of interest in these as i cant find anywhere in the uk that make a direct silicon replacement for the factory fitted one. They currently have my intake pipe and are gonna come back to me with cost/colour variety/availability etc, when they have made one which i can trial. Who would be interested in one for a start? And would this be a marketable item, i believe so. Please msg me or email me on rikkytoyer@hotmail.co.uk if you would be intetested so i can pass on an initial number of potential sales. Once manufactured they will be featured in a section of PVW and the golf magazine. Link to post Share on other sites
FishWick 21 Posted August 10, 2012 Report Share Posted August 10, 2012 Do you mean the one that connects the MAF to the throttle body?If so, make sure it's flexible or it could end up being yanked off the MAF under harsh acceleration! Link to post Share on other sites
Rtoyer82 0 Posted August 10, 2012 Author Report Share Posted August 10, 2012 Yeah thats the one mate and yeah they are flexible silicone, secured in with 2 jubilee clips. Link to post Share on other sites
donpulsar 0 Posted September 5, 2012 Report Share Posted September 5, 2012 I'd be interested in one with no spouts :-) Link to post Share on other sites
Recommended Posts