Gordo91 0 Posted March 19, 2013 Report Share Posted March 19, 2013 Hi guys once again on about my cr not idling, 97 supercharged vr6 idles fine untill engine is at 90 degrees then cuts out when coming to a stop , changed the plugs and the maf sensor anyone ideas? Link to post Share on other sites
VR6Pete 1,455 Posted March 19, 2013 Report Share Posted March 19, 2013 Hi mate, sorry I can't remember if yours is an Odb1 or Odb2? Have you had it on VCDS? Link to post Share on other sites
Gordo91 0 Posted March 19, 2013 Author Report Share Posted March 19, 2013 Its obd2 mate. Only had it on launch and it came up with nothing Link to post Share on other sites
VR6Pete 1,455 Posted March 19, 2013 Report Share Posted March 19, 2013 Mmm the only thing I can think of is a vacuum leak or maybe the blue temp sensor as this feeds back to the ECU... Doing a quick google revealed these threads:http://media.corrado-club.ca/tech/vacuumhose_stalling.pdfhttps://www.google.co.uk/search?hl=en&client=safari&q=+site:vr6oc.com+vr6+blue+temp+sensor&sa=X&ei=mtRIUYjfKoeZ0AW4toHADQ&ved=0CFIQrQIwAw&biw=320&bih=505Take a look not sure how much these are these days though... Link to post Share on other sites
Gordo91 0 Posted March 19, 2013 Author Report Share Posted March 19, 2013 Thanks mate il look into it Link to post Share on other sites
matty.vrt 120 Posted March 19, 2013 Report Share Posted March 19, 2013 Air getting in between the maf and the throttle body always kills the idle Link to post Share on other sites
Gordo91 0 Posted March 19, 2013 Author Report Share Posted March 19, 2013 il have a look at that aswell but nothing was touched from when it was ok to the way it is now. Link to post Share on other sites
Recommended Posts