Jaymo8 0 Posted April 28, 2013 Author Report Share Posted April 28, 2013 Cheers for that man!!! Not as expensive as I've seen mate. Will have to go get some ordered up. Have you got the part numbers for them? Taken off the arms and bladesArm - 6X2 955 410 CBlade - 6X2 955 426 AThat's £20 x4 not £20 x2. This was also a couple of years ago so no doubt the prices will have gone up.Cheers mate. Will have to go and enquire this week Link to post Share on other sites
VR6Pete 1,455 Posted April 28, 2013 Report Share Posted April 28, 2013 Let me know too if you don't mind Link to post Share on other sites
Lukey. 381 Posted April 28, 2013 Report Share Posted April 28, 2013 Just went and checked my passenger side as I'd forgotten I'd swapped it for a different one to maximise screen swept area. 1J2955426BIt's an inch longer towards the drivers side and about 2 inches longer towards the passenger side, pretty much the whole screen gets wiped with this combo. Question, is the corrado screen the same size as the mk3? As if not it may not need the bigger passenger blade. Link to post Share on other sites
Jaymo8 0 Posted April 28, 2013 Author Report Share Posted April 28, 2013 Just went and checked my passenger side as I'd forgotten I'd swapped it for a different one to maximise screen swept area. 1J2955426BIt's an inch longer towards the drivers side and about 2 inches longer towards the passenger side' date=' pretty much the whole screen gets wiped with this combo. Question, is the corrado screen the same size as the mk3? As if not it may not need the bigger passenger blade. [/quote']Cheers buddy! Think the rados are a tiny bit bigger just looking will have to do my research Link to post Share on other sites
Jaymo8 0 Posted April 29, 2013 Author Report Share Posted April 29, 2013 Let me know too if you don't mind Will do pete hopefully they haven't put the prices up to silly money Link to post Share on other sites
Jaymo8 0 Posted April 29, 2013 Author Report Share Posted April 29, 2013 Done abit of research and you definitely need two drivers side wiper arms as if you got a passenger one it would foul the bonnet when lifting the arms up. Gonna try swing by a local vw dealer and find a price for everyone who's interested Link to post Share on other sites
Lukey. 381 Posted April 29, 2013 Report Share Posted April 29, 2013 Yea that's the reason for 2 driver side arms, I was on about the longer passenger blade, you need 2 drivers side arms or you can't lift them up. Link to post Share on other sites
Jaymo8 0 Posted April 29, 2013 Author Report Share Posted April 29, 2013 UPDATE (pic heavy):Gave the girl a nice clean tonight with my mate in his astra vxr as the sun was shining. Also had some goodies turn up in MOMO boxes lots of pics for you guys. Link to post Share on other sites
Daverse 175 Posted April 30, 2013 Report Share Posted April 30, 2013 Nice shorts lookin good dude! Link to post Share on other sites
VR6Pete 1,455 Posted April 30, 2013 Report Share Posted April 30, 2013 awesome dude that looks great! Love the VR6OC sticker might borrow that for our facebook page if that's ok? :) Link to post Share on other sites
Jaymo8 0 Posted April 30, 2013 Author Report Share Posted April 30, 2013 Cheers guys awesome dude that looks great! Love the VR6OC sticker might borrow that for our facebook page if that's ok? :) Yeah pete that's fine will keep an eye out for it Link to post Share on other sites
Lukey. 381 Posted April 30, 2013 Report Share Posted April 30, 2013 Someone got a fisheye attachment for their iPhone.. Link to post Share on other sites
Jaymo8 0 Posted April 30, 2013 Author Report Share Posted April 30, 2013 Someone got a fisheye attachment for their iPhone..haha you got it mate!!UPDATE: Yet again another update for you all. Wheels and adaptors turned up today Did a quick test fit and theyre off to be blasted and powder coated tomorrow with some luck. what you guys think?? Link to post Share on other sites
VR6Pete 1,455 Posted April 30, 2013 Report Share Posted April 30, 2013 Nice! Different wheels them, what are they? Link to post Share on other sites
Jaymo8 0 Posted May 1, 2013 Author Report Share Posted May 1, 2013 Nice! Different wheels them' date=' what are they?[/quote']Cheers pete. Not too sure, they're off of a merc something. Link to post Share on other sites
Jaymo8 0 Posted May 12, 2013 Author Report Share Posted May 12, 2013 Been a while since ive done a little update but the wheels are back from powder coat Tyres will be on saturday and decat is happening saturday too so lots of photos and a big post to come over next weekend Link to post Share on other sites
Jaymo8 0 Posted May 22, 2013 Author Report Share Posted May 22, 2013 UPDATE:Hi guys, been a while. Got a nice update for you all. Hope you like what ive done. Wheels are finally on with new Toyo TR-1's, it's now lowered 100mm all round, sitting rather pretty in my opinion. Also gave the rear light cluster abit of red wrap to make the amber bit a deeper nicer orange. Heres some photos all opinions welcome Link to post Share on other sites
VR6Pete 1,455 Posted May 22, 2013 Report Share Posted May 22, 2013 Loving those wheels! Hope your playing in our show and shine at the rolling road day, you could just be going away with a trophy Ride height is puuuuuurfect too! Link to post Share on other sites
Jaymo8 0 Posted May 22, 2013 Author Report Share Posted May 22, 2013 Loving those wheels! Hope your playing in our show and shine at the rolling road day' date=' you could just be going away with a trophy Ride height is puuuuuurfect too![/quote']haha cheers pete! Yeah i should be mate dont think i can take part in the rollers bit though as i wont be able to get her on there haha. Link to post Share on other sites
VR6Pete 1,455 Posted May 22, 2013 Report Share Posted May 22, 2013 You will be cutting it fine I think. If you look at my Facebook page you can see how low my car is from the side and there's a photo of mine on the rollers yesterday for comparison Link to post Share on other sites
Jaymo8 0 Posted May 23, 2013 Author Report Share Posted May 23, 2013 You will be cutting it fine I think. If you look at my Facebook page you can see how low my car is from the side and there's a photo of mine on the rollers yesterday for comparison Yeahh just had a look for comparison, mine definitely isnt getting on there man! will just have to come over to meet you all and take part in the show and shine Link to post Share on other sites
Jaymo8 0 Posted June 5, 2013 Author Report Share Posted June 5, 2013 BEEN A LONG TIME SINCE AN UPDATEBeen a while since ive done an update for you guys, not much else has changed so far. Had a couple of photo shoots done by my friend:What you guys think??On the other side also have some bad news SHE'S A SMOKING AND STALLINGnot a nice post to have to put up. The VR has started smoking and stalling more often think this could be leading to abit of a rebuild replacing valve stem seals, valve guides, head gasket and piston rings. not happy need to try and compression test it this weekend. Anyone know a good compresson tester for a vr6? Anyone else have any good ideas as to what could be up? Link to post Share on other sites
Recommended Posts