Russvrt 85 Posted April 19, 2014 Author Report Share Posted April 19, 2014 bit of an update for you guys,,ive been busy today sorting a few bits,first of all got new tyres fitted to the zw1s so fitted those along with some 312mm brakes,I think they fill the wheel nicely.and ive tacked my boost pipes together in place ,just waiting for my mate to tig weld them up for me next week..and refurbed the front panel with welded in boost pipe to shorten the length as much as possible.and did the same with the intake including maf.nearly done ,what do you think? c00k and Bealieboy 2 Link to post Share on other sites
Airone 16 Posted April 19, 2014 Report Share Posted April 19, 2014 I think it looks mint man lovin the 3" intake looks the part for sure. Link to post Share on other sites
mattvr6 133 Posted April 19, 2014 Report Share Posted April 19, 2014 Nice looking motor that pal Sent from my iPhone using Tapatalk Link to post Share on other sites
Russvrt 85 Posted May 9, 2014 Author Report Share Posted May 9, 2014 Well been on with this as much as possible this week and got loads done but doesn't really look any different ! Coolant pipes all fitted ,boost pipes all in and clamped,I've welded the down pipe and fitted two lambda bosses,made up exhaust from down pipe to rear axle(still need a few parts to Finnish the exhaust as it's too loud with just one silencer)Just waiting for my mate to Finnish tig welding the 4"intake fill with coolant and test drive!!!!Will get some pics up when it looks like I've done something.. Link to post Share on other sites
Russvrt 85 Posted May 26, 2014 Author Report Share Posted May 26, 2014 Just spent the day making my exhaust ,what a pain in the backside that was and still need to do a bit more to get the back box sitting right but it's almost there , Link to post Share on other sites
Lukey. 381 Posted May 27, 2014 Report Share Posted May 27, 2014 Slowly slowly catchy monkey Link to post Share on other sites
Russvrt 85 Posted June 5, 2014 Author Report Share Posted June 5, 2014 Heres some pics for you of where im at ,, boost pipes all tig welded thanks to my mate fitz,,filled it with coolant tonight so could get it up to temp and it runs so much better warm ,, Having a few starting problems where it takes ages to fire up from cold then wont idle till its warmed up abit.. pics]]] just need to bleed the brakes and finnish the exhaust now so it can be tested ,, will be at Fitted UK on 20th july at weatherby race course .. bennyk and daveyboy 2 Link to post Share on other sites
Russvrt 85 Posted August 1, 2014 Author Report Share Posted August 1, 2014 This is how she stands now ,currently swapping looms out to run obd2 c2 chip ,but I don't think it will be on the road this year now as my bmw daily has blown its turbo so that's gonna lighten my wallet a fair bit and take up any spare time I have fixing it .. cactusjackslade 1 Link to post Share on other sites
Russvrt 85 Posted August 3, 2014 Author Report Share Posted August 3, 2014 Well 3 hours later the turbo is now off the bm ,,oil everywhere !!Will get pics up of the mess!At this rate I should get some time on the corrado next week . Link to post Share on other sites
vr6guy 29 Posted August 3, 2014 Report Share Posted August 3, 2014 corrado looks lovely! sorry to hear about bmw, ive not long done twin turbo on my bmw... exensive!best of luck and keep updating Link to post Share on other sites
Lukey. 381 Posted August 3, 2014 Report Share Posted August 3, 2014 (edited) Having different car turbo problems myself, probably less serious, but still, empathy, I'm off away tomorrow so have had to dump it in a garages car park, they'll find out in the morning lol Edited August 3, 2014 by Lukey. Link to post Share on other sites
DanChave 98 Posted August 5, 2014 Report Share Posted August 5, 2014 Awesome build Link to post Share on other sites
Russvrt 85 Posted August 19, 2014 Author Report Share Posted August 19, 2014 Well bm turbo swap is all done and have put about 500 miles on it and all is well, had a little panic as on the first drive I couldn't see anything behind me for the smoke! But that soon cleared..On to the corrado,I've put all the obd2 stuff in and couldn't understand why I had no fuel or injectors until the saviour in the form of rubjonny ran through the electrics with me and narrowed it down to a dead ecu,,so ordered one of eBay ,when that came it fired straight up and then cut out as the immobiliser kicked in,I looked into getting it removed or fitting the standered immobiliser and getting the chip I have linked with the ecu but then I came across an immobiliser emulator on eBay for £17 ,after a few emails it arrived today so after work I soldered the three wires needed for it and the car now starts and keeps running so I'm well happy!All that's left on that side of things now is to get a socket soldered into the ecu for the c2 chip ,Really looking forward to a test drive now as it's been so long,,. daveyboy and D11PS 2 Link to post Share on other sites
Russvrt 85 Posted August 31, 2014 Author Report Share Posted August 31, 2014 Got the corrado all back together now,only problem I have now is that my copy of vcds won't do throttle body alignment Link to post Share on other sites
Lukey. 381 Posted September 1, 2014 Report Share Posted September 1, 2014 I have full gen vcds mate Russvrt 1 Link to post Share on other sites
Russvrt 85 Posted September 1, 2014 Author Report Share Posted September 1, 2014 Got someone coming over this eve who says he can do it,if he can't would you be able to pop over Luke to have a look? Link to post Share on other sites
Lukey. 381 Posted September 1, 2014 Report Share Posted September 1, 2014 possibly depending on the time Link to post Share on other sites
Russvrt 85 Posted September 1, 2014 Author Report Share Posted September 1, 2014 Doesn't have to be right away,weekend or whenever you are free.. Link to post Share on other sites
Lukey. 381 Posted September 1, 2014 Report Share Posted September 1, 2014 Yea then if you need Link to post Share on other sites
Russvrt 85 Posted September 1, 2014 Author Report Share Posted September 1, 2014 Sorted,,well alignment is done ,thanks for the offer tho Luke, still wouldn't run so changed maf this made it a little better ,idles fine now but as soon as I accelorate it bogs down so need to look into this now,, Link to post Share on other sites
Russvrt 85 Posted September 8, 2014 Author Report Share Posted September 8, 2014 I now have a starting reving vrt,,,,only now it idles at nearly 1.8k ,! Link to post Share on other sites
Lukey. 381 Posted September 8, 2014 Report Share Posted September 8, 2014 whats that? like some serious cold start? Link to post Share on other sites
Russvrt 85 Posted September 9, 2014 Author Report Share Posted September 9, 2014 I really don't know ,if it was a vac leak it would be a low lumpy idle wouldn't it? Just messing with the maf now as I think it's getting turbulence from the turbo,also reason it would start and cut out was the maf was pointing in the wrong direction.. Link to post Share on other sites
Russvrt 85 Posted September 9, 2014 Author Report Share Posted September 9, 2014 I really don't know ,if it was a vac leak it would be a low lumpy idle wouldn't it? Just messing with the maf now as I think it's getting turbulence from the turbo,also reason it would start and cut out was the maf was pointing in the wrong direction.. Link to post Share on other sites
Russvrt 85 Posted December 10, 2014 Author Report Share Posted December 10, 2014 Wow long time since I updated this!All is running fine now at 11psi ,goes like a scalded cat and sounds increadable! New seats ,,heated ,electric recaros...Will update more soon but currently putting up a garage for it to live in.. ibs, D11PS and c00k 3 Link to post Share on other sites
Recommended Posts