besters 26 Posted October 20, 2013 Report Share Posted October 20, 2013 (edited) I've been asked if I can supply short shifters for the Golf Mk3 as I already do for the Corrado Forum, link here - http://the-corrado.net/showthread.php?t=61985&highlight=tunnel Photo here - https://drive.google.com/open?id=0B3G5ikFakLqGdDc2ZUp6YnlzYkk The Golf shifter is very similar to the Corrado shifter but they are NOT the same or interchangeable, I've taken a Golf shifter and a Corrado shifter complete with the Ali mounting frame and compared the two and they are very similar. The details are - Forward and back reduction only. Neutral to gear select reduction of 20mm (26%). It's only a mild reduction to prevent notchyness and excessive effort required to change gear. All worn parts replaced. Use your existing gear knob. Mechanism cleaned and greased. Install guide provided. Sold on an exchange basis only. If not completely satisfied, return the shifter for a refund. If you require feedback please see the above link on the Corrado Forum. Price is £90 posted with £25 refund on the return of your shifter to me providing it can be re-used. I can modify your shifter if it is sent to me but it needs to be in good condition, I will need it for around 10 days, cost for this is £70 posted back to you. Payment by Paypal or bank transfer, PM me for details. Comments very welcome. Thanks Dave Edited September 6, 2022 by besters matt1986, Sasar, sharki and 1 other 4 Link to post Share on other sites
djiceman 131 Posted October 20, 2013 Report Share Posted October 20, 2013 I'll definitely have one at the end of the month, if I was closer as I said via pm I'd be happy to be a guinea pig. Link to post Share on other sites
ssaunders 199 Posted October 20, 2013 Report Share Posted October 20, 2013 Hi mate, is install the same as a rado? Out from underneath or cut the body? I will take one please. Pm payment details. Any chance of install instructions to get my head around?CheersSteve Link to post Share on other sites
Ickyketseddie 89 Posted October 20, 2013 Report Share Posted October 20, 2013 Looks great. Would like to see a how too. Shame I'm Northants otherwise my cars ideal for the guinea pig, I don't use it at all right now and it's totally stripped inside lol. Sent from my iPad using Tapatalk - now Free Link to post Share on other sites
daveyboy 897 Posted October 20, 2013 Report Share Posted October 20, 2013 Can you make them with a bigger reduction in the throw? I like a fairly notchy feel to my gear change Link to post Share on other sites
mat-ryder 2 Posted October 20, 2013 Report Share Posted October 20, 2013 How soon before i could get one of these, very interested Link to post Share on other sites
Sechs Toy 32 Posted October 21, 2013 Report Share Posted October 21, 2013 I'm using a shifter from a corrado g60 can you do that?I also have a mk3 vr6 one lying around if it's any good to you Link to post Share on other sites
djiceman 131 Posted October 22, 2013 Report Share Posted October 22, 2013 I'll definitely have one at the end of the month, if I was closer as I said via pm I'd be happy to be a guinea pig.As someone else has mentioned, would it be possible to get some picture instructions of how to fit one please? Link to post Share on other sites
besters 26 Posted October 22, 2013 Author Report Share Posted October 22, 2013 Lots of questions and I'll try to answer best I can....... I'm not familiar with the Golf so not sure if fitting is the same as the Rado. On the Rado you can either drop it out from underneath or cut a small section of the body out (hidden under the gear gaitor). I can email the Rado install guide but I can't guarantee it'll suit the Golf. I can shorten the throw but again I'm not sure how much I can go on the Golf. As soon as I can prove this works the sooner I can start supplying them. I'll guess at least a month away. Major Lucky, are you using the Rado G60 shifter in your Golf? Yeah the mk3 vr6 shifter I can use, PM me a price posted please. Apologies for being a little vague regarding the Golf but give me time and I'll get my head around it. CheersDave Link to post Share on other sites
Sechs Toy 32 Posted October 22, 2013 Report Share Posted October 22, 2013 Yeah, I'm using the corrado g60 shifter as I've got a mishmash of gearbox, vr6 bell housing with g60 casing and g60 selector I can drop the whole shifter box out easy peasy Link to post Share on other sites
besters 26 Posted October 23, 2013 Author Report Share Posted October 23, 2013 I've had a forum member come forward to tryout the shifter who is fairly local to me so hopefully I'll be doing it this weekend, just need to confirm a day and time. I'll report back with the results. Ickyketseddie 1 Link to post Share on other sites
sedge 7 Posted October 24, 2013 Report Share Posted October 24, 2013 Hi dude, I'm interested in this and my golf is currently sat in Sandiacre waiting for a mot which will hopefully be this weekend. Could arrange meeting up to see how it all works? Link to post Share on other sites
sedge 7 Posted October 24, 2013 Report Share Posted October 24, 2013 Ah just saw the post about your in touch with someone so no worries will be interested to see how it goes though Link to post Share on other sites
besters 26 Posted October 26, 2013 Author Report Share Posted October 26, 2013 sedge, I live in Sandiacre, where's your mot being done? matt1986 1 Link to post Share on other sites
SNH 11 Posted October 26, 2013 Report Share Posted October 26, 2013 I'd be interested in this also.I'm Mansfield so not too far Link to post Share on other sites
besters 26 Posted November 6, 2013 Author Report Share Posted November 6, 2013 Bit of a delay with this but hope to get it moving again in the next few days. Ickyketseddie 1 Link to post Share on other sites
besters 26 Posted November 11, 2013 Author Report Share Posted November 11, 2013 Update - I've dropped the shifter into matt yesterday for him to trial it, I await his response. daveyboy and VR6Pete 2 Link to post Share on other sites
djiceman 131 Posted November 15, 2013 Report Share Posted November 15, 2013 Looking forward to this!! Would love some info on how to fit (preferably with pics lol) once it's for sale!!Sent from my iPad using Tapatalk Link to post Share on other sites
VR6Pete 1,455 Posted November 16, 2013 Report Share Posted November 16, 2013 Good work Dave I've had a fair few things off Dave and I can personally vouch for the quality and workmanship that goes into all his products. Pete Club Chairman Link to post Share on other sites
besters 26 Posted November 16, 2013 Author Report Share Posted November 16, 2013 Good work DaveI've had a fair few things off Dave and I can personally vouch for the quality and workmanship that goes into all his products.PeteClub Chairman Thank you Pete. If all has gone well with Matt I should be able to start selling these in about a week. Dave VR6Pete 1 Link to post Share on other sites
R666VRG 0 Posted November 17, 2013 Report Share Posted November 17, 2013 Hi I am very interested with this. My VR is off the road ATM so can send you my 'cut down' shifter! May also have a friend interested, PM me when ready cheers Luke Link to post Share on other sites
mattvr6 133 Posted November 24, 2013 Report Share Posted November 24, 2013 (edited) All is good went for a proper blast Friday very happy recommend it 2 any vr6 owner Sent from my iPhone using Tapatalk Edited November 24, 2013 by mattvr6 Link to post Share on other sites
djiceman 131 Posted November 24, 2013 Report Share Posted November 24, 2013 Glad to hear the test went well.How much difference does it make in the throw in the real world?Sent from my iPhone using Tapatalk Link to post Share on other sites
besters 26 Posted November 24, 2013 Author Report Share Posted November 24, 2013 Glad to hear the test went well.How much difference does it make in the throw in the real world?Sent from my iPhone using Tapatalk Think Matt will have to answer that one. Link to post Share on other sites
besters 26 Posted November 24, 2013 Author Report Share Posted November 24, 2013 Just got back from Matt's place. As said he's very happy with it and it does feel good when shifting between gears albeit sat on his drive without the engine running. So I'm happy to supply these but need to modify the Corrado install guide to suit the Golf. For me to successfully supply these I do rely on standard shifters being returned to me. ThanksDave tonytyre09 1 Link to post Share on other sites
Recommended Posts