Jump to content

Recommended Posts

  • 4 weeks later...

Well, one ABS pump changed & it's still throwing up the exact same codes as before. Namely both hydraulic pump & terminal 30 supply signals outside specification.

I've got one more pump/ECU to try but if that doesn't work I don't know what to do....... :(

Link to post
Share on other sites

Have you looked at the connector pins on the multiplugs, given them a squirt with electrical contact cleaner and a cotton bud wipe, and reconnect. The 2 fuses aswell, are they ok, although if the light goes out they should be....

 

The supply signal suggests the ecu is dead, but youve had that done, or their is a wiring fault which is why the connector cleaning could work due to no signal if the pins are gunked up.

Link to post
Share on other sites

Just a thought. I've replaced the pump with one that ends 217 C. The original ended 217 E, I've been told that as the ECU has the same number & that 217 C superseded 217 E then it should all work.... How did you do yours mate?

Link to post
Share on other sites
  • 3 weeks later...
×
×
  • Create New...