Vr6pates 2 Posted November 23, 2013 Report Share Posted November 23, 2013 Can't get my heated seats to work have checked all cables under neath the seats and there all plugged in and have checked fuses as they are on the same as the electric mirrors and that's ok but still nothing.have changed the heat controller on the dash put no joy could some one shed some light on this matter please Link to post Share on other sites
CALICO 130 Posted November 24, 2013 Report Share Posted November 24, 2013 Possibly the heater loom in the seat has a split in it. You will need to take the seat cover off and have a look. Have you made sure power is getting to the seat before you do that though. Link to post Share on other sites
Vr6pates 2 Posted December 8, 2013 Author Report Share Posted December 8, 2013 Hi guys have had another look at the seats again and it's strange that both seats aren't working.what should I check, how many fuses are there for the seats.which one do I check in the fuse box and which pins on the seat connectors should have power going to them Link to post Share on other sites
Vr6pates 2 Posted December 9, 2013 Author Report Share Posted December 9, 2013 Right have looked this morning and have checked power to the controller and that's there have checked the power under neath the seats and that's there and I can hear the relays buzzing underneath both seats but still nothing which wires do I check for the loom on heater pads and what else do I check for Link to post Share on other sites
Vr6pates 2 Posted December 15, 2013 Author Report Share Posted December 15, 2013 As above have had ago agAin today but cannot find a problem the relays are working can hear them both buzzing but don't know what to check next Link to post Share on other sites
Ndubber1970 2 Posted November 13, 2014 Report Share Posted November 13, 2014 I'm interested in this too....If anyone can help? Link to post Share on other sites
CALICO 130 Posted November 13, 2014 Report Share Posted November 13, 2014 Sorry I think you need a continuity tester and maybe remove the cover from the seat to determine if you can see a break in the pad. Link to post Share on other sites
Recommended Posts