daveyboy 897 Posted August 30, 2015 Report Share Posted August 30, 2015 I'm sure I see. Some on ebay a little while back and liked them then Bealieboy and bennyk 2 Link to post Share on other sites
bennyk 1,238 Posted August 30, 2015 Author Report Share Posted August 30, 2015 No you couldn't of done Bealieboy would of sent me a link he definitely would've found them! D11PS and Bealieboy 2 Link to post Share on other sites
Bealieboy 1,625 Posted August 30, 2015 Report Share Posted August 30, 2015 I've a keen eye for stuff like this! D11PS, daveyboy and bennyk 3 Link to post Share on other sites
dubspy 19 Posted August 31, 2015 Report Share Posted August 31, 2015 (edited) There was actually a set on eBay a little while ago, I brought them :) Edited August 31, 2015 by dubspy bennyk and Bealieboy 2 Link to post Share on other sites
c00k 435 Posted September 1, 2015 Report Share Posted September 1, 2015 Nice wheels man, Let me know how you get on with the 185's, I have same tyres on my summer wheels, And find I can make them brake traction quite easily. Link to post Share on other sites
bennyk 1,238 Posted September 1, 2015 Author Report Share Posted September 1, 2015 There was actually a set on eBay a little while ago, I brought them :)You fitting them on a Golf? I reckon they'd suit a Corrado very nicely! Link to post Share on other sites
bennyk 1,238 Posted September 1, 2015 Author Report Share Posted September 1, 2015 Nice wheels man, Let me know how you get on with the 185's, I have same tyres on my summer wheels, And find I can make them brake traction quite easily.Yeah I've got no doubt it wont be the most tractable car! I'm well trained in wrestling fwd cars with no grip though after owning a 300odd bhp Astra before this! Link to post Share on other sites
dubspy 19 Posted September 1, 2015 Report Share Posted September 1, 2015 (edited) You fitting them on a Golf? I reckon they'd suit a Corrado very nicely! Hi fella.. They will be on a golf (not a corrado fan).. i have plenty of sets of wheels and not enough cars.. So when they actually make it on may be a different story.. never even realised the old players MK3 was running them.. Yours do look very good with them on.. Edited September 1, 2015 by dubspy Bealieboy and bennyk 2 Link to post Share on other sites
patpong_pete 0 Posted September 22, 2015 Report Share Posted September 22, 2015 Yeah I've got no doubt it wont be the most tractable car! I'm well trained in wrestling fwd cars with no grip though after owning a 300odd bhp Astra before this! bennyk Rotrex on and vr6 best combo what bhp on RR got to be about 299bhp or more great work Link to post Share on other sites
bennyk 1,238 Posted September 22, 2015 Author Report Share Posted September 22, 2015 (edited) Went to Players show on Sunday as it's literally 10 minutes down the road from me, (well then an hour of traffic around the airfield as its was so ridiculously busy) . I went back to my Compomotive TH monos for it as I like the whole Motorsport(ish) look they give the car; As it was only down the road I thought I'd see how low I could get the car on the coilovers, this was how low!;Then a few very kind people sent me some shots of the car from the day; Players is a great show by the way if you can make it one year with a amazing mix of cars highly recommended Edited September 26, 2015 by bennyk Bealieboy, c00k and ky_uk 3 Link to post Share on other sites
c00k 435 Posted September 26, 2015 Report Share Posted September 26, 2015 (edited) I think I prefer it on the gold wheel, Players is brilliant show, I was there but not in VR. Car looked sweet man, did have a good look round it Edited September 26, 2015 by c00k bennyk and Bealieboy 2 Link to post Share on other sites
Bealieboy 1,625 Posted September 26, 2015 Report Share Posted September 26, 2015 I think I prefer it on the gold wheel, Players is brilliant show, I was there but not in VR. Car looked sweet man, did have a good look round it I think I may have spotted/ heard you talking about Bens wheels cook. I wish I'd have spoken now..., I was going to! Link to post Share on other sites
c00k 435 Posted September 27, 2015 Report Share Posted September 27, 2015 (edited) You may of done buddy, I was looking at it for 15-20mins, with one of my mates. I got a Welsh accent, as I'm from Wales. I'm 5-11ish, dark brown short hair.Un-shaven, but more of stubble than a beard. Edited September 27, 2015 by c00k Link to post Share on other sites
bennyk 1,238 Posted September 27, 2015 Author Report Share Posted September 27, 2015 Gutted I didn't meet you mate! That was a fair old drive across country for you then? Link to post Share on other sites
c00k 435 Posted September 28, 2015 Report Share Posted September 28, 2015 Yeah man, me and my mate have been to players for last 5 years, we left at 4.30AM to get there on time lol Only year I have missed GTi international, is this year, been last 7 years. I'll be at plenty more next year. Bealieboy and bennyk 2 Link to post Share on other sites
bennyk 1,238 Posted October 7, 2015 Author Report Share Posted October 7, 2015 (edited) After a few small set backs like relocating the maf, a few shows and the arrival of this little one; Say hello to Lennie, I'll have I'm in a lowered little tykes car soon....in red of course! Anyway I managed to get a day booked off work and a mapping session booked at Stealth, the car runs the Ecu from the black Vf charged car so it was half way there! It drove ok but had a big flat spot around 3.5k, after speaking to Vince he assured me he could map it and get it running right. I was expecting 270-280bhp and nearly fell over half way through when Vince told me it'd be probably make 300+, well chuffed! It ended up at 307bhp and drove back brilliantly in between traffic and artics not letting each other over take so I did 56-57mph all the way across the A14!! F+#%ing lorry drivers!Here's a few pics; Surrounded by Corrados; On the rollers;the graph; Edited October 7, 2015 by bennyk VR6Pete, D11PS, Mk3highline and 2 others 5 Link to post Share on other sites
bennyk 1,238 Posted October 7, 2015 Author Report Share Posted October 7, 2015 And a couple of videos;https://vimeo.com/141722436On from behind, that Eisenmann back box makes a good noise! https://vimeo.com/141722704 D11PS, VR6Pete, Bealieboy and 1 other 4 Link to post Share on other sites
ky_uk 304 Posted October 7, 2015 Report Share Posted October 7, 2015 Congratulations buddy firstly on the baby and secondly the car, I hope mine gives a good read when I get mine there. Are you running maff before the charger ? bennyk 1 Link to post Share on other sites
bennyk 1,238 Posted October 8, 2015 Author Report Share Posted October 8, 2015 Yes the maf before the charger and is now behind the bumper on the left side of the car, due to turbulence caused by the charger. D11PS 1 Link to post Share on other sites
ky_uk 304 Posted October 8, 2015 Report Share Posted October 8, 2015 (edited) Yes the maf before the charger and is now behind the bumper on the left side of the car, due to turbulence caused by the charger.Glad you confirmed that for me I put mine before also because I couldn't see it working otherwise are you running the standard vr6 maf ? Edited October 8, 2015 by ky_uk Link to post Share on other sites
D11PS 146 Posted October 8, 2015 Report Share Posted October 8, 2015 Glad you confirmed that for me I put mine before also because I couldn't see it working otherwise are you running the standard vr6 maf ?Yeah It's a standard 3" VR6 MAF bennyk and ky_uk 2 Link to post Share on other sites
bennyk 1,238 Posted November 6, 2015 Author Report Share Posted November 6, 2015 Just a little update, as this being a Dad stuff seems to take a fair bit of time up! I'm planning to change the clutch soon, so got the gearbox I've had sitting around for ages which is fitted with a Quaiffe diff cleaned and painted up and fitted with new driveshaft and end cap seals. While I was at it I smoothed a few casting marks out as well, this was the etch primer, All done and back together; I've also reinforced a spare clutch fork I had laying about, so now I just need to get a clutch and fit it. ky_uk, c00k, D11PS and 1 other 4 Link to post Share on other sites
ky_uk 304 Posted November 6, 2015 Report Share Posted November 6, 2015 Wow that's clean!! I want to do mine D11PS 1 Link to post Share on other sites
bennyk 1,238 Posted November 6, 2015 Author Report Share Posted November 6, 2015 (edited) Wasn't to hard just a bit of elbow grease, a small dye grinder, a can of etch primer, a can of gloss black and finally a can of wheel silver, I restrained myself from going too mad and 2 pack priming it to smooth it and then base and laquering it, just wanted it to look clean and new. Edited November 6, 2015 by bennyk D11PS 1 Link to post Share on other sites
ky_uk 304 Posted November 6, 2015 Report Share Posted November 6, 2015 I have just ordered some wossner pistons and booked my block in for work to make it 3.0 litre so finally the ball is moving D11PS 1 Link to post Share on other sites
Recommended Posts