Jimmysan 0 Posted December 5, 2013 Report Share Posted December 5, 2013 Can anybody give me any ideas as to where I should look for the control unit / box The black and brown clifford cables feed across the central console under the steering wheel and deep towards the driver footwell, from there I can't see the box. Could it be on the other side behind the glove box? Thanks in advance Link to post Share on other sites
Ickyketseddie 89 Posted December 5, 2013 Report Share Posted December 5, 2013 I didn't have a Clifford but found the control box behind the passenger side kick plate for my alarm. Sent from my iPad using Tapatalk Link to post Share on other sites
Jimmysan 0 Posted December 5, 2013 Author Report Share Posted December 5, 2013 Also, I have a small hidden button (microswitch?) attached to my gear stick, how does this work, it is part of the clifford system, but not mentioned in the manual Link to post Share on other sites
Jimmysan 0 Posted December 5, 2013 Author Report Share Posted December 5, 2013 Reason I ask is because I have non-start/cutting out issues, thanks Link to post Share on other sites
VR6Pete 1,455 Posted December 5, 2013 Report Share Posted December 5, 2013 I have a PDF document covering the concept 350, should be similar. I'll upload tomorrow as it's on my work laptop. I found mine behind my centre console under the heater controls / stereo area but usually could be anywhere, I had a big bundle if wires under my steering column that wasn't factory looking and traced them back. Club Chairman Link to post Share on other sites
Jimmysan 0 Posted December 6, 2013 Author Report Share Posted December 6, 2013 (edited) ok thanks Pete Edited December 6, 2013 by Jimmysan Link to post Share on other sites
VR6Pete 1,455 Posted December 6, 2013 Report Share Posted December 6, 2013 I have the PDF for the 650, sorry I thought it was for an earlier model! but it isn't, still might have some useful information in there though! will try and dig out some other PDF's for you Clifford-Concept-650-MKII-Install-UK.pdf Link to post Share on other sites
Steveyv09 0 Posted February 7, 2014 Report Share Posted February 7, 2014 Hello I know this isn't in the right section but I'm wiring a viper alarm into my friends vr6 we got all the all arm working apart from the central locking. Could anyone help as to what wires on the vacuum pump to connect to, I have tried the green and grey wires but know luck It won't lock or unlock and pump don't fire up but if we use the key in the door it still locks and unlocks, he just wants the central locking side of the alarm. More than anything. Any help would be very much appreciated, Cheers guys Sent from my HTC One X+ using Tapatalk HD Link to post Share on other sites
Steveyv09 0 Posted February 7, 2014 Report Share Posted February 7, 2014 Hello I know this isn't in the right section but I'm wiring a viper alarm into my friends vr6 we got all the all alarm working apart from the central locking. Could anyone help as to what wires on the vacuum pump to connect to, I have tried the green and grey wires but know luck It won't lock or unlock and pump don't fire up but if we use the key in the door it still locks and unlocks, he just wants the central locking side of the alarm. More than anything. Any help would be very much appreciated, Cheers guys Sent from my HTC One X+ using Tapatalk HD Sent from my HTC One X+ using Tapatalk HD Link to post Share on other sites
Recommended Posts