Bealieboy 1,625 Posted May 13, 2015 Report Share Posted May 13, 2015 Almost to the penny! Link to post Share on other sites
Russvrt 85 Posted May 15, 2015 Report Share Posted May 15, 2015 Nice purchase ,,,you might struggle running it on obd2 as it's the later engine unlike highlines ..I would do it properly and get the me7 ecu and looms so it runs how it should ,loom splice is pretty simple too.. Link to post Share on other sites
daveyboy 897 Posted May 15, 2015 Author Report Share Posted May 15, 2015 How simple russ? Link to post Share on other sites
Russvrt 85 Posted May 15, 2015 Report Share Posted May 15, 2015 Just need both vr looms and 24v looms rub them together ,done,,...Il be doing Aaron's r32 loom ,there's a few guides on how to do it ,with basic understanding it shouldn't be too difficult.or send it off with £200 and it can be done for you.. Link to post Share on other sites
daveyboy 897 Posted May 15, 2015 Author Report Share Posted May 15, 2015 Hmm I'll look into it. What would I do with the throttle body tho coz it's fly by wire on the 24v and obviously cable on the vr. Fancy doing it for me? I'll pay your fuel from harrogate and supply food and beers Bealieboy 1 Link to post Share on other sites
Russvrt 85 Posted May 16, 2015 Report Share Posted May 16, 2015 Use the 24v throttle body and dbw pedal ,I would do it for you but with 3 kids 'misses,house ,garage and 3 cars along with work I'm pretty stuffed when it comes to spare time..sorry but if you need any advise just ask,,.. Link to post Share on other sites
Mk3highline 287 Posted May 16, 2015 Report Share Posted May 16, 2015 There is that chap called rub Johnny on one of the forums think gtiSee if he can do the loom? Link to post Share on other sites
pappers 50 Posted May 16, 2015 Report Share Posted May 16, 2015 (edited) He's doing my loom. Busy chap but seems to know his onions. He does a lot of looms. Clubgti - I sent him a pm. Theres another guy called Andyout too on there. Edited May 16, 2015 by pappers Link to post Share on other sites
Russvrt 85 Posted May 16, 2015 Report Share Posted May 16, 2015 Ye Andy Outhwait did my 24v loom and sorted the ecu.. pappers 1 Link to post Share on other sites
daveyboy 897 Posted May 16, 2015 Author Report Share Posted May 16, 2015 So I need to get a drive by wire pedal from a mk4 too. A mate of mine knows someone who builds looms so I may ask him Link to post Share on other sites
pappers 50 Posted May 16, 2015 Report Share Posted May 16, 2015 Get the loom attached to the pedal too Link to post Share on other sites
daveyboy 897 Posted May 16, 2015 Author Report Share Posted May 16, 2015 So I could just get that from a breakers. Will any mk4 dbw pedal do or is it engine spacific? Link to post Share on other sites
Russvrt 85 Posted May 16, 2015 Report Share Posted May 16, 2015 Not too sure but would stick to same stuff,,try jasongtr I think he's called on eBay he always has 4mo bits.. Link to post Share on other sites
daveyboy 897 Posted May 16, 2015 Author Report Share Posted May 16, 2015 I'll have a look russ. Cheers. I thought it was gonna be fairly straight forward to do lol Link to post Share on other sites
Russvrt 85 Posted May 16, 2015 Report Share Posted May 16, 2015 http://www.ebay.co.uk/usr/jasongtr_car_parts?_trksid=p2047675.l2559That fella Link to post Share on other sites
daveyboy 897 Posted May 16, 2015 Author Report Share Posted May 16, 2015 Cheers Russ Link to post Share on other sites
martingraham 21 Posted May 16, 2015 Report Share Posted May 16, 2015 What colour code did you paint your inlet? Link to post Share on other sites
daveyboy 897 Posted May 16, 2015 Author Report Share Posted May 16, 2015 The red is LC3L Hot chilli red and the black was just a gloss black I had in a rattle can Link to post Share on other sites
Dave_ciw 507 Posted August 22, 2015 Report Share Posted August 22, 2015 Awesome fella... Done a fair bet then fair play! daveyboy 1 Link to post Share on other sites
daveyboy 897 Posted August 22, 2015 Author Report Share Posted August 22, 2015 Cheers Dave. I'm gonna get the 24v in over the winter but I'm gonna smooth my engine bay and paint it while the engine and box are out Dave_ciw 1 Link to post Share on other sites
Recommended Posts