HELP - What is this?

[jambojones10 0]

Was cleaning parts of my engine due to stalling problems. This spindle of metal came out of the part highlighted on the pictures. Is it supposed to be there. check out the pics. help cheers

http://photobucket.com/albums/v692/jambojones10/Car%20Parts/

[jambojones10 0]

Also what tool do i need to unscrew that screw in the first picture (image 69)

[DundeeDub 0]

I would say its not meant to be there, the bit thats highlighted is a vent from the rocker cover.

The Nut/Bolt that you need to remove is called a "spline", i can't remember what size it is as i got a set of various bit for about £8, Do a serch for 'spline and tools' and you should come up with something

[fabio_vr6 0]

it is ment to be there, its called a flame deflector on etka, stops oil getting into the intake;

[ Edited Fri May 06 2005, 06:33PM ]

[antera309 3]

Believe it or not, it's supposed to look like that! It's a flame trap, designed to prevent ignition of crankcase vapours in the event of a backfire.

I'm sure you could re-use the one you've pulled out, but if you'd feel happier with a new one, the pat number is 035 103 477 A

The engine cover bolts are 6-point Torx type (appropriate sockets available from Halfords), but I've managed to undo them with an allen key before.

Hope this helps!