Hutch 14 Posted January 12, 2014 Report Share Posted January 12, 2014 My HT leads won't stay in the slots in the engine cover. Any tips? It looks like a previous owner has tried to glue them in at some point! Link to post Share on other sites
VR6Pete 1,455 Posted January 12, 2014 Report Share Posted January 12, 2014 The engine plastics that retain the leads should have little tabs to keep the leads secure, sometimes people install crazy ht leads that are 10mm and then file these out to help them fit, so if you now have standard diameter leads then they won't stay put. What leads do you have, and does your ht lead guides have the plastic retaining tabs ? Club Chairman Link to post Share on other sites
Hutch 14 Posted January 13, 2014 Author Report Share Posted January 13, 2014 Ah right, I've not noticed any tabs. I'll have a good look at lunch. The current leads look like a mixture of 4 OEM and 2 magnacore jobbies, about 7/8mm I'd say. I'll be buying a new matching set soon to keep things uniform. Thanks Link to post Share on other sites
Hutch 14 Posted January 13, 2014 Author Report Share Posted January 13, 2014 ...no plastic tabs and the channels are full of nasty looking epoxy resin type glue. I'm going to look for new (or tidier) cable routing. Now I just need to find put how it all unbolts. Looks like several torx bolts. Link to post Share on other sites
Lukey. 381 Posted January 13, 2014 Report Share Posted January 13, 2014 You can use an Allen key to undo them, either 6 or 8 mm Link to post Share on other sites
Recommended Posts