Aleyre1989 0 Posted January 23, 2014 Report Share Posted January 23, 2014 I'm brand new I this forum after scanning goes and hours of pages my personal opinion was that this was the best forum to go with for advice...Right I have 51 plate Aue engined golf v6 4motion I want to so r32 conversion I have the mk5 bub engine with coilpacks everything (can get loom and ecu but don't think it will work ) to put this engine in my 4 motion what exactly do I need there is so many threads questions with allKinds of mixed answers and I just want to know... I've seen loads I easy ones on dropping into the BDE engined mk4s So what I want to know is if I get a BDE LOOM AND ECU will that work with the mk5 engine ? Are my aue injectors and rail same as a bde or will I need those too I've searched for mk4 ecu and loom they're like rocking horse poop so feel bde easier to sourceI've even seen one guy called mushy I think it was ran the mk5 engine with his AUE loom :-/ Also downpipes/manifold will my aue fit of will the mk5 ones fitOther queries mk5 cams sensors or Something ... Is it just the plugs need changing And pedal seen people talking about a pedal from mk5 Would greatly appreciate help I can assure you I have typed every possible search into my google bar and every link is now purple so I apologise of ie missed a thread where it's clear as daylight but in sure it will be posted on here haha thabks Link to post Share on other sites
mattvr6 133 Posted January 23, 2014 Report Share Posted January 23, 2014 Is it really worth all the hassle to swap it all over? Exhaust cams remap etc will put u about r32 power anyway? A lot of effort for not a lot of gain in my opinion Sent from my iPhone using Tapatalk Link to post Share on other sites
Aleyre1989 0 Posted January 23, 2014 Author Report Share Posted January 23, 2014 It's cheap engine off my mate £400 needs rid :-) Link to post Share on other sites
mattvr6 133 Posted January 23, 2014 Report Share Posted January 23, 2014 Still a lot of hassle 4mos r good as they r Sent from my iPhone using Tapatalk Link to post Share on other sites
Aleyre1989 0 Posted January 23, 2014 Author Report Share Posted January 23, 2014 I have AUE engine tho poor engine really I think :-/ Link to post Share on other sites
michael5556 247 Posted January 23, 2014 Report Share Posted January 23, 2014 Sell it too me Link to post Share on other sites
michael5556 247 Posted January 23, 2014 Report Share Posted January 23, 2014 Aue is a good is a good engine. R32's are over rated. I agree with the mods like cams etc will be much more worthwhile. Link to post Share on other sites
zipupurmickey 7 Posted January 23, 2014 Report Share Posted January 23, 2014 Is it really worth all the hassle to swap it all over? Exhaust cams remap etc will put u about r32 power anyway? A lot of effort for not a lot of gain in my opinion Sent from my iPhone using Tapatalk +1 Slightly off topic, I'd be very interested in the Bub engine if it's still for sale on the off chance you don't buy it. Sent from my iPhone using Tapatalk Link to post Share on other sites
Aleyre1989 0 Posted January 24, 2014 Author Report Share Posted January 24, 2014 Well allready bought it bud it's cheap as it's dropped a valve so head ends taking off which I didn't mind because all the reason to have the head done new gaskets and timing chain kit the engine has everything with it bar the loom ecu all the inlet maf alternator ancillaries sump etc everything the bottom end is fine crank is spot on pistons move freely up and the rods all straight as they should be if I was to sell it I'd want more than £400 as I know it's worth a lot more it's a good friend of mine hence low price :-/ but really I'd like to drop it into my 4 motion but I'll see just need answers first Is the AUE bottom end same as the BDE? Link to post Share on other sites
UnitedMotorsport 55 Posted January 24, 2014 Report Share Posted January 24, 2014 Is the AUE bottom end same as the BDE?Same bottom end The R32 engine is much better because of the difference in the cylinder heads The BDE is better than the AUE too, because of superior cam control. Link to post Share on other sites
Aleyre1989 0 Posted January 24, 2014 Author Report Share Posted January 24, 2014 Thank you ^^^ Link to post Share on other sites
Aleyre1989 0 Posted January 24, 2014 Author Report Share Posted January 24, 2014 So if I put the cylinder head on I could use the 32 timing chain kit ? Comprising of 2 chains as the AUE has 3 Link to post Share on other sites
zipupurmickey 7 Posted January 24, 2014 Report Share Posted January 24, 2014 Well allready bought it bud it's cheap as it's dropped a valve so head ends taking off which I didn't mind because all the reason to have the head done new gaskets and timing chain kit the engine has everything with it bar the loom ecu all the inlet maf alternator ancillaries sump etc everything the bottom end is fine crank is spot on pistons move freely up and the rods all straight as they should be if I was to sell it I'd want more than £400 as I know it's worth a lot more it's a good friend of mine hence low price :-/ but really I'd like to drop it into my 4 motion but I'll see just need answers first Is the AUE bottom end same as the BDE? No worries my man! If you change your mind, Pm me a price and we'll sort something out. Thanks, Sent from my iPhone using Tapatalk Link to post Share on other sites
Recommended Posts