Radodb 4 Posted February 7, 2014 Report Share Posted February 7, 2014 alright lads, I'm still collecting parts for my vet build. I recently got my SRI, 630cc injectors and 034 motorsport fuel rail but I have clearance issues with my fuel rail and the SRI i have got myself... dose anyone on if the 630cc injectors will fit in the standard VR6 fuel rail?? ill post some pictures up of my clearance issue thanks lads Link to post Share on other sites
Radodb 4 Posted February 7, 2014 Author Report Share Posted February 7, 2014 (edited) I no my clearance issue is due to the SRI I have got and the fact iv opted to use the vr6 standard FPR.. I cannot rotate the FPR adaptor round. Could I have it on the other side of the fuel rail or do I need to keep it the way it is now like the standard fuel rail?? If anyone has any clue on if the 630cc injectors fit the standard fuel rail I'll gladly use that and sell my 034 rail and adaptor iv searched but came up with nothing Sent from my iPhone using Tapatalk Edited February 11, 2014 by Radodb Link to post Share on other sites
chrisvr6t 19 Posted February 7, 2014 Report Share Posted February 7, 2014 I have my Siemens deka 630s in a standard fuel rail but I had to flip it up side down so the fpr is in the opposite side as it was fouling on the mani Sent from my iPhone using Tapatalk Link to post Share on other sites
MonzaVR6T 3 Posted February 8, 2014 Report Share Posted February 8, 2014 I'd say flipping it around is the way forwards. Just remember to switch the lines around! Link to post Share on other sites
Recommended Posts