k4na.x 0 Posted February 18, 2014 Report Share Posted February 18, 2014 Hi all, As per the title I am after some help with identifying the below plugs on the engine bay wiring loom please. 1.Location next to ECU plug - outside temp sensor? 2.Located next to water reservoir 3.Located just before radiator & fan plugs 4.Located next to starter motor plug 5.Located next to starter motor plug 6 & 7.Located at the end of drivers side loom near to horn plug - is larger one AC related? In addition could anyone advise wire colours/provide picture of aux water pump if none of the above. Your help is appreciated and please let me know if you need any further info on the plug. Thanks in advance!! Link to post Share on other sites
GordonC 20 Posted February 18, 2014 Report Share Posted February 18, 2014 Number 4 is the exciter wire for the starter motor mateVR6 Loonibuggy Santa Pod 2014 ! Link to post Share on other sites
GordonC 20 Posted February 18, 2014 Report Share Posted February 18, 2014 And number 1 goes to the gearbox either the reverse light switch or speed sensor cant rememberVR6 Loonibuggy Santa Pod 2014 ! Link to post Share on other sites
GordonC 20 Posted February 18, 2014 Report Share Posted February 18, 2014 I think number 2 could be your aux water pump aswellVR6 Loonibuggy Santa Pod 2014 ! Link to post Share on other sites
k4na.x 0 Posted February 19, 2014 Author Report Share Posted February 19, 2014 Thanks for the response GordonI have already identified the road speed sensorNo.2 has a different groove on the plug to the aux water pumpCan anybody please help with confirming the above and the others?Thanks Link to post Share on other sites
Lukey. 381 Posted February 19, 2014 Report Share Posted February 19, 2014 (edited) Is 2 the cam sensorEdit if it's right next to the expansion tank is it the level probe Edited February 19, 2014 by Lukey. Link to post Share on other sites
GordonC 20 Posted February 19, 2014 Report Share Posted February 19, 2014 Deffinitly not the lever probe mate they have a much wider plug with a gap in between the wires VR6 Loonibuggy Santa Pod 2014 ! Link to post Share on other sites
k4na.x 0 Posted February 23, 2014 Author Report Share Posted February 23, 2014 Thanks for the responses.Number 2 definitely isn't the level probe.Still struggling with these, may need to find a local vr owner that can let me look around their engine bay. Link to post Share on other sites
Recommended Posts