Daverse 175 Posted July 29, 2014 Report Share Posted July 29, 2014 Hi all,As i will be changing my door cards to leathers, i want to make the most of the job and though about putting something like dynomat inside the doors, should stop a lot of that hollow noise you get off the engine and make a more satisfying noise when you shut the door. Has anyone ever done this before? Any tips or advice? Also aby recommendations on what materials you used and what the result was.Thanks,Dave Link to post Share on other sites
Lukey. 381 Posted July 29, 2014 Report Share Posted July 29, 2014 Roof flashing tape is essentially the same stuff but a lot cheaper per sq ft than dynamat Link to post Share on other sites
Surreyvr6 199 Posted July 29, 2014 Report Share Posted July 29, 2014 Roof flashing tape is essentially the same stuff but a lot cheaper per sq ft than dynamatHave you used this yourself, just had a look and if my calculations are right it does work out a LOT cheaper!Sent from your mums iPhone using Tapatalk Link to post Share on other sites
Lukey. 381 Posted July 30, 2014 Report Share Posted July 30, 2014 Yea I have in the past, worked just as good Surreyvr6 1 Link to post Share on other sites
The Duke 27 Posted July 30, 2014 Report Share Posted July 30, 2014 I done this years ago and used sound deadening made by brown bread. No complaints with it and easy to use. http://www.brownbread.eng.net Link to post Share on other sites
Daverse 175 Posted July 31, 2014 Author Report Share Posted July 31, 2014 At first i thought you were joking luke, but then i suppose it does make sense, suppose there wont be any weight differences? How hard is it to apply, as you would have go in from the bottom where the window mech is and reach up? Link to post Share on other sites
Lukey. 381 Posted July 31, 2014 Report Share Posted July 31, 2014 Yea one of those plastic rollers is ideal for the job to make it adhere well and smooth it out Link to post Share on other sites
Recommended Posts