swiftkid 1 Posted August 6, 2014 Report Share Posted August 6, 2014 I'm currently doing an r32 conversion into my Corrado vr6, I've finally got it running so now my attention has turned to the little bits... The tacho is not working, I've been told that apparently the ecu sends an analogue signal out but has no pin, so I've put the pin in, unfortunately it doesn't seem to have worked... Bugger! So I have a couple of options, either piggy back off the coil or get a canbus adapter. Now thinking about the canbus adapter I might be able to use the oil temp sensor from sump and get the tacho working.Anyone got any advise on what canbus adapter is suitable? Or where I can get them from? Link to post Share on other sites
Recommended Posts