ibs 308 Posted October 9, 2014 Author Report Share Posted October 9, 2014 Yeah that'll help. Yes you can get them all off from above mate. Are you using a short runner inlet?Yes mate I've got a short runner to go on Link to post Share on other sites
ibs 308 Posted October 9, 2014 Author Report Share Posted October 9, 2014 going to be keeping an eye on this just started doing the same to my corrado, what turbo setup etc have you gone for?I bought a used turbonetics GT35 with a turbonetics wastegate from another member on here. Also came with a 3" downpipe with milltek backbox. The other bits I've bought are:Short runner intake manifoldSiemens 630cc injectorsArp headboltsWalbro in tank fuel pumpPrism forged rods with arp boltsMocal oil coolerOil catch tankSchimmel 263 camsWavetrac differential & install kit D11PS and GT53BAD 2 Link to post Share on other sites
Poriordan 97 Posted October 9, 2014 Report Share Posted October 9, 2014 Nice work mate should be good when your done ;-) Link to post Share on other sites
ibs 308 Posted October 9, 2014 Author Report Share Posted October 9, 2014 Nice work mate should be good when your done ;-)Thanks mate. Any idea what sort of power my setup will be running? I'm hoping for around 400 horses GT53BAD and daveyboy 2 Link to post Share on other sites
daveyboy 897 Posted October 10, 2014 Report Share Posted October 10, 2014 I'd say 400 should achievable with your set up ibs and D11PS 2 Link to post Share on other sites
ibs 308 Posted October 10, 2014 Author Report Share Posted October 10, 2014 I was playing around with photoshop earlier. I'm wandering wether to bad boy it or not. What do you think people? ky_uk 1 Link to post Share on other sites
daveyboy 897 Posted October 10, 2014 Report Share Posted October 10, 2014 It just so happens I have a bonnet on a mk3 I'm breaking that's been bad boy'd GT53BAD 1 Link to post Share on other sites
ibs 308 Posted October 10, 2014 Author Report Share Posted October 10, 2014 It's not a vento bonnet is it? Or if it's been bad boy'd will it not matter if it's being used with vento headlights? Link to post Share on other sites
Reaperx 181 Posted October 10, 2014 Report Share Posted October 10, 2014 It just so happens I have a bonnet on a mk3 I'm breaking that's been bad boy'd you have way too many car parts laying about how big is your garage or shed. Link to post Share on other sites
daveyboy 897 Posted October 11, 2014 Report Share Posted October 11, 2014 It's not a vento bonnet is it? Or if it's been bad boy'd will it not matter if it's being used with vento headlights?No its a golf bonnet mate Link to post Share on other sites
daveyboy 897 Posted October 11, 2014 Report Share Posted October 11, 2014 you have way too many car parts laying about how big is your garage or shed.Lol I've still got that golf you got the door off mate Link to post Share on other sites
ibs 308 Posted October 11, 2014 Author Report Share Posted October 11, 2014 No its a golf bonnet mateWould you have a picture of the bonnet on the car so I can see how low the bad boy comes down? Link to post Share on other sites
daveyboy 897 Posted October 11, 2014 Report Share Posted October 11, 2014 I could get one later mate. It's in dragon green ibs 1 Link to post Share on other sites
Bealieboy 1,625 Posted October 11, 2014 Report Share Posted October 11, 2014 (edited) No its a golf bonnet mateGot any trick bits on the one you're breaking daveyboy? Any leather, decat etc? Good front wings? Sent from my iPhone using Tapatalk Edited October 11, 2014 by Bealieboy Link to post Share on other sites
daveyboy 897 Posted October 11, 2014 Report Share Posted October 11, 2014 Nah sorry mate it was a 1.9tdi that me and a mate got as my mate wants sub frame etc for his mk2 1.8T build and there was a few bits I needed too Link to post Share on other sites
Bealieboy 1,625 Posted October 11, 2014 Report Share Posted October 11, 2014 Nah sorry mate it was a 1.9tdi that me and a mate got as my mate wants sub frame etc for his mk2 1.8T build and there was a few bits I needed toofair enough. Are the front wings up to much? Sent from my iPhone using Tapatalk Link to post Share on other sites
daveyboy 897 Posted October 11, 2014 Report Share Posted October 11, 2014 (edited) Nah the front wings are shot mate Edited October 11, 2014 by daveyboy Link to post Share on other sites
ibs 308 Posted October 16, 2014 Author Report Share Posted October 16, 2014 Bit of an update on the car. Got back to work on it on Saturday spent a couple of hours trying to get the 3 bolts on the exhaust flange before where the cat would normally go undone. They were rusted and were not budging at all! Ended up leaving them and coming back the next day with a Dremel and cutting them off. Last night we managed to get the engine out of the car. Its currently sat on my garage floor. I bought one of these engine stands you can buy from machine mart but does anyone know what size bolts I would need to mount the engine to the stand? Do they have to be a certain type to take the weight? Link to post Share on other sites
ibs 308 Posted October 30, 2014 Author Report Share Posted October 30, 2014 Not really updated this as much as i should have. Been really busy with work. I'm probably just over a quarter of the way through the project now. The engine is out and on a stand. All the ancillaries are off and today i got round to taking the head off. I did notice something which does not look to good. Does anybody have any idea what could be the cause of all the oil around the valve in the picture... Link to post Share on other sites
ibs 308 Posted October 30, 2014 Author Report Share Posted October 30, 2014 Couple of other updates. I have dropped off the gearbox to a gearbox specialist in the area, he will be fitting the Wavetrac differential i have bought. Also picked up some Brembo calipers which came off a Seat Leon Cupra R. I bought these after following some advice from a mate who said they would fit straight on but i now know this will not be the case. I will see what work is involved when i am ready for them to go on. In the meantime i had them powder coated red as they were originally yellow. Since i had the calipers powder coated i've had this really bad urge of getting a lot of other stuff powder coated red too. My short air intake has been done and next week i will be dropping off the alternator bracket, alternator casing and the new aluminium rocker cover which i have just bought as my original one is plastic. In the beginning when i started this project i was not really to bothered about what everything was going to look like but now i have changed my mind and am going for a black and red theme. Bealieboy and VR6CABBS 2 Link to post Share on other sites
ibs 308 Posted October 30, 2014 Author Report Share Posted October 30, 2014 (edited) Some of the other bits i have ready to go on: Schimmel 263 cams supplied by Vince at Stealth Siemens 630cc injectors bought off ebay Arp head bolts which i read were a definite must when going turbo. Bought from h-tune.co.uk Edited October 30, 2014 by ibs D11PS 1 Link to post Share on other sites
VR6CABBS 1,311 Posted October 31, 2014 Report Share Posted October 31, 2014 Nice bit of thread that pal. Keep it coming mate. Thinking of doing mine over the winter months while it's still got low miles on. How much have you spent up to now?Sent from my iPad using Tapatalk Link to post Share on other sites
ibs 308 Posted October 31, 2014 Author Report Share Posted October 31, 2014 Cheers mate. I've not properly added everything up but I am guessing around 4k up to now just on the parts. Still got to buy a clutch, boost pipes, silicone coolant hoses and a few other bits. Link to post Share on other sites
ibs 308 Posted October 31, 2014 Author Report Share Posted October 31, 2014 Coolant crack pipe just got delivered. Would have preferred it in black but nobody had 1 in stock. Ordered this one form awesomegti.com GT53BAD and VR6CABBS 2 Link to post Share on other sites
VR6CABBS 1,311 Posted October 31, 2014 Report Share Posted October 31, 2014 Coolant crack pipe just got delivered. Would have preferred it in black but nobody had 1 in stock. Ordered this one form awesomegti.comHey it looks cool in stainless mate. Too much black under the bonnet hides everything. Let it stand out. Haha. Shit man 4k. Ermmmm this might have to be a silent project for me. The less the misses knows the better. Hahahaha. Probably just collect it in bits and it won't hit the pocket hard that way. Lol.Sent from my iPad using Tapatalk GT53BAD 1 Link to post Share on other sites
Recommended Posts