Jump to content

Recommended Posts

Hi , so I attempted the vcds on the vento obd2 vr6 and it came up with the following ,

not fussed about the abs stuff but worried why I cant connect to the engine and the auto trans code

 

anyone got any ideas?

 

 

 

could not scan the engine , tried a few times kept coming up excessive comms errors

 

VCDS-Lite Version: Release 1.0
Tuesday, 02 December 2014, 17:06:22:0

Chassis Type: 1H - VW Golf/Vento III
Scan: 01,02,03,08,12,15,25,41,56
 
-------------------------------------------------------------------------------
Address 01: Engine       Labels: 01M-927-733.LBL
   Controller: 021 906 256
   Note: Excessive Comm Errors

-------------------------------------------------------------------------------
Address 02: Auto Trans       Labels: 01M-927-733.LBL
   Controller: 01M 927 733 CT
   Component: AG4 Getriebe 01M    3363
   Coding: 00000
   Shop #: WSC 00000
1 Fault Found:
00518 - Throttle Position Sensor (G69)
            16-10 - Signal Outside Specifications - Intermittent

-------------------------------------------------------------------------------
Address 03: ABS Brakes       Labels: 3A0-907-379.LBL
   Controller: 3A0 907 379 E
   Component: ABS/EDS ITTAE 20 GI V00
   Coding: 03704
   Shop #: WSC 00000
2 Faults Found:
00290 - ABS Wheel Speed Sensor; Rear Left (G46)
            35-00 - -
00287 - ABS Wheel Speed Sensor; Rear Right (G44)
            35-00 - -

-------------------------------------------------------------------------------
Address 15: Airbags       Labels: 6N0-909-60x-VW2.LBL
   Controller: 6N0 909 603 E
   Component: AIRBAG VW2          V00
   Coding: 00069
   Shop #: WSC 01317
1 Fault Found:
00532 - Supply Voltage B+
            07-10 - Signal too Low - Intermittent

-------------------------------------------------------------------------------
Address 25: Immobilizer       Labels: 1H0-953-257.LBL
   Controller: 1H0 953 257 B
   Component: IMMO VWZ3Z0V3230127 V00
   Coding: 09600
   Shop #: WSC 00000
No fault code found.

End   --------------------------------------------------------------------------------------------------

Link to post
Share on other sites

16507/P0123/000291 - Throttle Position Sensor (G69): Signal too High

Possible Symptoms

  • Malfunction Indicator Light (MIL) ON
  • EPC Light On
  • Increased Idle Speed
  • Bucking at Load Change

Possible Causes

  • Fuse(s) faulty
  • Wiring and/or Connector(s) from/to Throttle Position Sensor (G69) faulty
  • Throttle Position Sensor(s) Faulty
  • Throttle Body dirty
  • Throttle Body faulty

Possible Solutions

  • Check Fuse(s)
  • Check Wiring and/or Connector(s) from/to Throttle Position Sensor (G69)
  • Clean Throttle Body and complete TBA
  • Check Throttle Body Wiring
  • Check Throttle Body
  • Check/Replace Throttle Position Sensor (G69)

    • On DBW Vehicles This Includes Accelerator Pedal Position Sensor 1 (G79) and 2 (G185).
    • On DBC Vehicles This Includes Throttle Position Sensor G69 and G88.

Special Notes

  • See Throttle Body Alignment (TBA)

  • Use Meas. Blocks & Basic Setting for testing
  • When found in the NAR 2.0l TFSI: (BPY, CCTA and CBFA)

    • Check VW TSB 01-09-04 or 2018652 for a wiring repair at the Throttle Body.
    • Check for proper seating at the ignition coils.

  • When found in the NAR Audi 2.0l TFSI, 3.2L FSI and 3.6L FSI engines:

    • Check Audi TSB 97-08-25 or 2018260/4 for a wiring repair at the Throttle Body.

Link to post
Share on other sites
  • 4 weeks later...

Well it also beats me. Even Fookin google translate hasn't got a clue. Lol.

This could be terrorist related code work that's found it way onto VR6OC......

Needs reporting to MI5 I reckon. Lol

Sent from my iPhone using Tapatalk

I rekon even MI5 would take one look and think "I'm sure this can wait until the 6th"

Link to post
Share on other sites

North Wales is the other side of the country for Bealieboy. Wrexhams pretty close to me J. It's at the end of the M56 ain't it pal.

Yeah not too far off cabbs, 56, onto 53, just bypass Chester and it's pretty much wrexham shit hole from there on.

I'm trying to bargain a set of wheels as we speak from a secret location, so you know that little "new wheels" thread""?? Watch this space......

Link to post
Share on other sites
×
×
  • Create New...