Antihero1981 8 Posted January 11, 2015 Report Share Posted January 11, 2015 Hi guys still having issues with the vento , vr6 obd2 1997 so I have changed the following new spark plusnew coil packnew ignition switchnew crank sensornew temp sensor and the vento still just cranks and not fires , I took off the coil pack wiring plug and don't get any voltage with the ignition on , this does not sound right. where does the coil pack get power from ? been 3 months and she is not running what else can I check? Link to post Share on other sites
Gwr corrado 189 Posted January 11, 2015 Report Share Posted January 11, 2015 Looks like you are checking all the electrical side of things have you checked fuel pump etc ? Is the car priming the injectors ? My wife's raddo would t start and it ended up being the relays for the heated leather seats ? They were drawing soo much power from the battery , 60 amps that it stopped enough power from getting to the fuel pp relay ?? Link to post Share on other sites
Antihero1981 8 Posted January 11, 2015 Author Report Share Posted January 11, 2015 I have checked fuel pump and it primes up , you can hear relay clicking in on/off and you can smell the petrol , just does not seem to be getting spark. someone mentioned starter solenoid , Link to post Share on other sites
Cooz93 66 Posted February 20, 2015 Report Share Posted February 20, 2015 Have you tried the coil pack itself? May be faulty. Link to post Share on other sites
Mk3highline 287 Posted February 21, 2015 Report Share Posted February 21, 2015 Try the fuse to the ignition/coil pack??Might be a cut wire or bad earth to cool pack Link to post Share on other sites
Antihero1981 8 Posted February 27, 2015 Author Report Share Posted February 27, 2015 Yeah new coil pack , checked all fuses and nothing dude Link to post Share on other sites
Recommended Posts