pappers 50 Posted May 6, 2015 Author Report Share Posted May 6, 2015 Got the downpipe for 12 and 24v from my 2 donors. Not wanting lightened flywheel, using standard. Stealth are doing my ECU work yes. Already primed. Loom guy busy till Sept. Link to post Share on other sites
pappers 50 Posted May 6, 2015 Author Report Share Posted May 6, 2015 My 24v dp has the lambdas in with wiring and plugs. Link to post Share on other sites
daveyboy 897 Posted May 6, 2015 Report Share Posted May 6, 2015 Will I need all 4 lambdas when I do my swap? I'm using the 12v engine loom and ecu as mk3highline has. I was just gonna cut the 24v down pipe and mate it to the 12v down pipe Link to post Share on other sites
pappers 50 Posted May 6, 2015 Author Report Share Posted May 6, 2015 Id give stealth a ring. I'm using mk4 management so might as well use the 4 as theyre there anyway, not really about needing them. I guess it would map better as has more info from lambdas...? Partial guess there. VR6Pete 1 Link to post Share on other sites
Mk3highline 287 Posted May 6, 2015 Report Share Posted May 6, 2015 Will I need all 4 lambdas when I do my swap? I'm using the 12v engine loom and ecu as mk3highline has. I was just gonna cut the 24v down pipe and mate it to the 12v down pipeNope we only need one nice and simple lol daveyboy 1 Link to post Share on other sites
Mk3highline 287 Posted May 6, 2015 Report Share Posted May 6, 2015 Cool you might be ok with most of the 4mo downpipeI bought a Sachs clutch from euro car parts was pretty cheap tooHave you asked vince if he wants to do the wiring loom? daveyboy 1 Link to post Share on other sites
pappers 50 Posted May 6, 2015 Author Report Share Posted May 6, 2015 I haven't asked him to do the loom as I'd already got in touch with someone else and been through what I want.Yeah Daveyboy you'll only need 1 with mk3 ECU.Will prob go sachs too. daveyboy 1 Link to post Share on other sites
daveyboy 897 Posted May 6, 2015 Report Share Posted May 6, 2015 I think I paid £90 for my sachs clutch kit from euro Link to post Share on other sites
Mk3highline 287 Posted May 6, 2015 Report Share Posted May 6, 2015 At the time think I paid about £67 but I got 2 oil filters 10l oil fuel filter Spent over £100 and got £15 off So total was about £105 for lot lolI did 2 oil filter changes in the first 200 miles lol Link to post Share on other sites
pappers 50 Posted May 6, 2015 Author Report Share Posted May 6, 2015 Good point, I'll check for deals as need some service bits anyway. Link to post Share on other sites
pappers 50 Posted May 7, 2015 Author Report Share Posted May 7, 2015 I just became a paid member as figured im going to ask a lot more q's...I noticed a discount benefit with Vibra Tech, which brings me to ask what engine mounts are you all running? Id rather be on the stiffer end of half way between but not competition. Any recommendations/warnings? Link to post Share on other sites
pappers 50 Posted May 7, 2015 Author Report Share Posted May 7, 2015 She'll never know. Mk3highline and VR6Pete 2 Link to post Share on other sites
daveyboy 897 Posted May 7, 2015 Report Share Posted May 7, 2015 baking the paint on? My mate done similar but his lass caught him and went nuts. He had a cylinder head in the dish washer mk3_matt 1 Link to post Share on other sites
pappers 50 Posted May 7, 2015 Author Report Share Posted May 7, 2015 Yes I used enamel...can't see it making up for my crappy prep! I got inspiration after seeing a gearbox in someones bathtub. daveyboy 1 Link to post Share on other sites
c00k 435 Posted May 8, 2015 Report Share Posted May 8, 2015 (edited) It works well, but stinks out your house for day or so. I've done it before on few things. Good idea thou buddy Edited May 8, 2015 by c00k pappers 1 Link to post Share on other sites
pappers 50 Posted May 10, 2015 Author Report Share Posted May 10, 2015 Smells like Airfix again! Painted starter, carriers and engine mounts yesterday. Starter and mounts are rattle canned. Built up new 12v thermostat assembly.De-loomed engine, deleted ac pump and fitted new belt, removed intake for looky looky. c00k 1 Link to post Share on other sites
pappers 50 Posted June 10, 2015 Author Report Share Posted June 10, 2015 Not had much time lately but swapped flywheels today from 24 to12v and got engine mounts on. Got a clutch on its way too so hopefully have gearbox fitted up soon. daveyboy 1 Link to post Share on other sites
pappers 50 Posted September 17, 2015 Author Report Share Posted September 17, 2015 Errmm, havent had much free time lately but getting back on it now. Loom is going off to be done soon so that will be a major step forward. Got a Sachs clutch on now & just ordered some of the most expensive bolts in the world from VW to mate the box back onto block.Changed crack pipe and thermostat in the last 2 months, real progress. Cheers. daveyboy 1 Link to post Share on other sites
daveyboy 897 Posted January 14, 2016 Report Share Posted January 14, 2016 Have you got any further with this mate? Link to post Share on other sites
pappers 50 Posted February 19, 2016 Author Report Share Posted February 19, 2016 Hi Daveyboy. Honestly not got much done. Looms away now being done. Bit of a wait but will be done properly. When the weathers a bit warmer I can get back to the Moto commute and take the golf off the road. Everything parts wise in the garage, just the usual busy busy. I'm going to say by end of March it'll be under way. 👷 daveyboy and VR6Pete 2 Link to post Share on other sites
pappers 50 Posted April 11, 2016 Author Report Share Posted April 11, 2016 Its begun...finally. The rear beam bushes completely went on friday so theres the excuse to take it off the road. Started on Sunday morning and have the monster of a 1.8 engine and box ready to pull out except releasing the cable clutch...which i might just cut to save the headache of wasted life spent in a mk3 pedal box. Anyway happy to have started. Link to post Share on other sites
pappers 50 Posted June 20, 2016 Author Report Share Posted June 20, 2016 Looms came back last week from rubjonny on clubgti. Really nice tidy work he's done on the mk3/4 loom. 24v is ready to go in. Maybe this weekend if it ain't still raining. daveyboy and Bealieboy 2 Link to post Share on other sites
pappers 50 Posted September 4, 2016 Author Report Share Posted September 4, 2016 Pretty much all done over the bank holiday. All went back in pretty nicely. Fabbed the pedal box mod. Just need a few hoses and bits n pieces. Hopefully have her running soon. Pics tmrw. bennyk 1 Link to post Share on other sites
bennyk 1,238 Posted September 6, 2016 Report Share Posted September 6, 2016 Look forward to seeing it done! pappers 1 Link to post Share on other sites
pappers 50 Posted September 7, 2016 Author Report Share Posted September 7, 2016 Link to post Share on other sites
Recommended Posts