spartanm300 1 Posted February 28, 2015 Report Share Posted February 28, 2015 (edited) hi guys so I decided to buy a vr6 project, I got it knowing it had a head gasket problem, so I stripped it down and got a new gasket. and im not shore if the gasket they sent me is the right one so was hoping someone can help me. its a elring gasket. thanks in advance Edited February 28, 2015 by spartanm300 martingraham 1 Link to post Share on other sites
spartanm300 1 Posted March 1, 2015 Author Report Share Posted March 1, 2015 Please help lol Link to post Share on other sites
daveyboy 897 Posted March 1, 2015 Report Share Posted March 1, 2015 It looks fine to me. Have you put it on the block to make sure everything lines up? Link to post Share on other sites
Jimjon 28 Posted March 1, 2015 Report Share Posted March 1, 2015 Looks OK. What makes you feel that it's wrong? Link to post Share on other sites
p0u1 14 Posted March 9, 2015 Report Share Posted March 9, 2015 I did one on a clio last saterday just lay the old one ontop and compare, also you should drain the coolint first and make sure you have new head bolts. Link to post Share on other sites
Recommended Posts