djiceman 131 Posted March 18, 2015 Report Share Posted March 18, 2015 Hi all.Managed to get myself a VR engine with a T4 turbo all running etc.Looking at the recommended parts list from Stealth and others, some of the supporting parts are different...• will 315cc injectors be ok?• what FPR's are people using?Thanks all! Link to post Share on other sites
Sump_slammer 23 Posted March 19, 2015 Report Share Posted March 19, 2015 If your getting the vehicle mapped standard fpr is fine. If your trying to get around not mapping it then a rising rate is a crude way of getting fueling but you will need a air fuel ratio sensor to set it up properly to make sure its not going to run lean or to rich. As for the injectors id say they are too small altho I'm sure someone would argue they're ok. but considering you can get a set of 6x Bosch greens new for £175 on ebay now it won't break the budget to look into a new set. Altho again people have there own ideas of whats good and whats not. Depends on your power goals. Also look into changing your pump if its not already done as your injectors can only inject whats at the rail. Bealieboy 1 Link to post Share on other sites
djiceman 131 Posted March 19, 2015 Author Report Share Posted March 19, 2015 (edited) Thanks dude, was just checking whether it could be run for a bit on 315cc to save on going all out straight away but thats cool, i'll get this done. Will definitely be mapped. Fuel pump is on my list of things to purchase. Edited March 19, 2015 by djiceman Link to post Share on other sites
Recommended Posts