Neil20vtc 44 Posted May 25, 2015 Report Share Posted May 25, 2015 about to buy a turbo for my vrt project was wondering where people bought there garrett units from preferably uk distributer i did a quick google and came up with owen developments but they dont list prices and you have to enquire about the items you want anyone use anyone else? cheers neil martingraham 1 Link to post Share on other sites
RBPE 198 Posted June 15, 2015 Report Share Posted June 15, 2015 I sell them, which one are you after? Link to post Share on other sites
dave_424 48 Posted June 16, 2015 Report Share Posted June 16, 2015 Sorry to hijack, how much for a T3 Garrett GT3582 ball bearing, .82 exhaust housing 4" inlet compressor housing, v-band 3" exhaust housing outlet? Link to post Share on other sites
RBPE 198 Posted June 22, 2015 Report Share Posted June 22, 2015 (edited) Sorry to hijack, how much for a T3 Garrett GT3582 ball bearing, .82 exhaust housing 4" inlet compressor housing, v-band 3" exhaust housing outlet? Usually they are £1035 + postage for the T3/4 bolt but I will get you a new quote and let you know on here as soon as poss (probably tomorrow now), as they often fluctuate from my supplier. Probably a bit more for the V-band. For that one I would also knock off some money and do it you as an OC member for £1015 all in if you have a usual UK post code but I could also do an EFR 7670 at a similar cost as I get better discounts if you want a quote on that too? Edited June 22, 2015 by RBPE Link to post Share on other sites
dave_424 48 Posted June 22, 2015 Report Share Posted June 22, 2015 Thank you very much for the reply, basically I'm going to try my china GT35 but I don't have high hopes for it so looking at finding somewhere lined up to buy from when it starts to go wrong. If you can also get the EFR then a quote on that too would be nice, something comparable to a GT35 with a .82 or 1.06 turbine housing. The build is to run up to about a bar of boost and be somewhere around 450bhp. Seems like it will be just over a grand then if this turbo decides to blow up. Link to post Share on other sites
RBPE 198 Posted June 23, 2015 Report Share Posted June 23, 2015 Thank you very much for the reply, basically I'm going to try my china GT35 but I don't have high hopes for it so looking at finding somewhere lined up to buy from when it starts to go wrong. If you can also get the EFR then a quote on that too would be nice, something comparable to a GT35 with a .82 or 1.06 turbine housing. The build is to run up to about a bar of boost and be somewhere around 450bhp. Seems like it will be just over a grand then if this turbo decides to blow up. Normally £1150 + postage for the v-band option on the GT35R but I'll do it OC members for £1120 all in std UK postcode. Best to e-mail directly in future at; sales@rbpe.co.uk or rbperformanceengineering@hotmail.co.uk CHeck this thread for EFR prices, they can fluctuate a touch but you get the general prices and discounts offered http://www.vr6oc.com/forum/topic/46270-vr6-oc-borg-warner-turbo-discounts/ Link to post Share on other sites
Neil20vtc 44 Posted June 23, 2015 Author Report Share Posted June 23, 2015 Sorry so late getting back to this thread I got mine from turbodynamics in the end a few days after posting for help, in the same specs your after Dave for around 1120 delivered but included the required oil restrictor couple of banjo fittings for the water in/out and a oil drain flange Link to post Share on other sites
FishWick 21 Posted June 30, 2015 Report Share Posted June 30, 2015 Usually they are £1035 + postage for the T3/4 bolt but I will get you a new quote and let you know on here as soon as poss (probably tomorrow now), as they often fluctuate from my supplier. Probably a bit more for the V-band. For that one I would also knock off some money and do it you as an OC member for £1015 all in if you have a usual UK post code but I could also do an EFR 7670 at a similar cost as I get better discounts if you want a quote on that too? As nice as a GT35 is, if I did mine again, I'd go with the EFR 7670 as it's a better turbo for packaging. By the time you've spent money on a decent external WG and DV for the GT35, the EFR works out a lot cheaper! Very good turbos from what I've read too. Link to post Share on other sites
RBPE 198 Posted July 1, 2015 Report Share Posted July 1, 2015 (edited) Yeah I like the EFR range too, fantastic turbo's, I'm hoping to do a twin scroll 8374 in the near future on either a VR or 4mo - my trade supplier is Turbodynamics too so let us know what they quote you in future and I will see what I can do in terms of best prices. Edited July 1, 2015 by RBPE Link to post Share on other sites
rhysemerson7 1 Posted July 7, 2015 Report Share Posted July 7, 2015 Is a forge induction kit any good for a mk5 r32 manual or are there better choices? Any tips on getting one up to 300bhp running nicely for the long time as I drive extremely hard? Sorry it's irrelevant! Link to post Share on other sites
Recommended Posts