dave_424 48 Posted October 17, 2016 Report Share Posted October 17, 2016 On my GT35R, I used a banjo bolt on the oil filter housing and another banjo going into the top of the turbo with no restrictor. But I expect that running though the multiple orifices in the two banjo bolts has reduced the pressure a bit. Best bet would be to phone Owen Developments, telling them that the VR6 can have 100psi oil pressure when cold. Link to post Share on other sites
JakeP 53 Posted November 25, 2016 Author Report Share Posted November 25, 2016 My phone has not been working for about a month so havent been able to post anything but will when my phone is repaired. Right now the engine is in the car and is really coming along, lots of little bits need to be done but will take time, my Eibach anti roll bars were meant to arrive on the 21st after I ordered them 2 months ago but its still being delayed until mid december which is frustrating after it was originally meant to arrive on the 21st of october, I need a few bits of information from people who have done turbo conversions , are the lines on the Throttle body need to be connected to any water lines or can I just cut them for easier fitment with the fan shroud? Link to post Share on other sites
JakeP 53 Posted November 25, 2016 Author Report Share Posted November 25, 2016 Also where can I get the plugs for the 02m DRP gearbox as I need to wire up the revserse light and speedo Link to post Share on other sites
Neil20vtc 44 Posted November 25, 2016 Report Share Posted November 25, 2016 I don't have anything connected to the water ports on the throttle body and my car was running fine, I think it only needs to be water cooled when it's in its original position as it sits above the exhaust manifold Link to post Share on other sites
JakeP 53 Posted November 26, 2016 Author Report Share Posted November 26, 2016 Thank you mate ill leave them where they are, cheers Link to post Share on other sites
JakeP 53 Posted January 22, 2017 Author Report Share Posted January 22, 2017 Been a while since I posted any updates of the car, got my phone fixed recently so will update you all shortly Link to post Share on other sites
JakeP 53 Posted January 29, 2017 Author Report Share Posted January 29, 2017 So this is how the car is now , engine is in , gearbox in Passenger drive shaft all bolted in , have fitted eibach front and rear anti roll bars , the car has powerflex bushes all round with fk coilovers on it. Everything has been replaced , new hubs . Bearings , track rods and ends , ball joints , wishbones etc etc Also bought these hefty bastards to help me stop! 334x32 discs with 17Z 6 pot calipers to go with them! Here's the rear axle that's all bolted back upCar looking sorry for itself lol VR6 Supercharged and RBPE 2 Link to post Share on other sites
VR6 Supercharged 104 Posted January 29, 2017 Report Share Posted January 29, 2017 23 minutes ago, JakeP said: So this is how the car is now , engine is in , gearbox in Passenger drive shaft all bolted in , have fitted eibach front and rear anti roll bars , the car has powerflex bushes all round with fk coilovers on it. Everything has been replaced , new hubs . Bearings , track rods and ends , ball joints , wishbones etc etc Also bought these hefty bastards to help me stop! 334x32 discs with 17Z 6 pot calipers to go with them! Here's the rear axle that's all bolted back up Car looking sorry for itself lol Me likey those calipers alot.... Link to post Share on other sites
JakeP 53 Posted February 18, 2018 Author Report Share Posted February 18, 2018 Bit of an update, here’s the car currently VR6 Supercharged 1 Link to post Share on other sites
VR6 Supercharged 104 Posted February 20, 2018 Report Share Posted February 20, 2018 Looking good for sure. Quick question, where did you get the arch spats/trims from? I like them a lot, been looking for some for my VR, only place I can find is in the US (Optikworx I think they're called) Would love some of those you have, as I like different... Link to post Share on other sites
JakeP 53 Posted March 28, 2018 Author Report Share Posted March 28, 2018 They are from Volkswagen wide body parts on Facebook mate VR6 Supercharged 1 Link to post Share on other sites
VR6 Supercharged 104 Posted March 29, 2018 Report Share Posted March 29, 2018 19 hours ago, JakeP said: They are from Volkswagen wide body parts on Facebook mate Thanks for that, will check them out. Cheers. Link to post Share on other sites
JakeP 53 Posted June 2, 2019 Author Report Share Posted June 2, 2019 Hi guys, I’m having an issue with the car, the car won’t run when the pro maf is plugged In, it just cuts out straight away Link to post Share on other sites
Recommended Posts