tonygti 22 Posted February 21, 2016 Report Share Posted February 21, 2016 Hi guys need some advice i bought a vortech v2 and the propellor rubs against the intake part of the charger it was rebuilt but think it needs a adjustment if i was to sell it the way it was with the oil lines what could i ask for it? VR6Pete 1 Link to post Share on other sites
VR6Pete 1,455 Posted February 21, 2016 Report Share Posted February 21, 2016 Hi Tony What are you asking here? if it can be adjusted or how much is it worth to sell in its current state? Link to post Share on other sites
tonygti 22 Posted February 21, 2016 Author Report Share Posted February 21, 2016 sorry i meant how much for sale i bought a rebuild kit from the states but now its slightly touching the outer case i got new induction it and intake for it new oil lines for it VR6Pete 1 Link to post Share on other sites
VR6Pete 1,455 Posted February 21, 2016 Report Share Posted February 21, 2016 29 minutes ago, tonygti said: sorry i meant how much for sale i bought a rebuild kit from the states but now its slightly touching the outer case i got new induction it and intake for it new oil lines for it Probably would put some people off if the issue catching the case wasn't sorted. How come you are no longer fitting it to car? Oil lines / AN fittings I picked up for around 50 quid. just sold my standard V1 intake for 20 quid after having a custom one fabricated at a cost of around 45 - 50 quid. Paid 700 for my V1 with all brackets / spacers etc... Link to post Share on other sites
tonygti 22 Posted February 21, 2016 Author Report Share Posted February 21, 2016 well to be honest my golf is giving me big problems and im in the pocess of possibly breaking it it been fully rebuilt engine using 263 schimmel cams but think time has come to get rid as got a few electical issues mechanical its perfect Link to post Share on other sites
VR6Pete 1,455 Posted February 21, 2016 Report Share Posted February 21, 2016 Should have seen my Corrado when I got mine. Nothing worked lol. With a little bit of know how and Bentley wiring guide I've now got everything working. What issues have you got? Link to post Share on other sites
tonygti 22 Posted February 21, 2016 Author Report Share Posted February 21, 2016 i tried man for ages even had electrician round sometimes starter motor doesent turn over when heated seats on revs idle goes up when indicators on car hunts Link to post Share on other sites
VR6Pete 1,455 Posted February 21, 2016 Report Share Posted February 21, 2016 First thing I'd be doing is swapping out alternator and starter motor. And possibly ignition switch. Link to post Share on other sites
tonygti 22 Posted February 21, 2016 Author Report Share Posted February 21, 2016 alternator brand new starter been checked going to VW tomorrow as work there one of the guys gonna look for me but if no joy i will break her VR6Pete 1 Link to post Share on other sites
VR6Pete 1,455 Posted February 28, 2016 Report Share Posted February 28, 2016 How did you get on? Link to post Share on other sites
tonygti 22 Posted March 3, 2016 Author Report Share Posted March 3, 2016 sadly still no joy found a bad earth on the rear lights but car still the same also smoking black smoke when accelerate hard Link to post Share on other sites
Bealieboy 1,625 Posted March 3, 2016 Report Share Posted March 3, 2016 sadly still no joy found a bad earth on the rear lights but car still the same also smoking black smoke when accelerate hard Smoking With the charger fitted? Sent from my iPhone using Tapatalk Link to post Share on other sites
tonygti 22 Posted March 4, 2016 Author Report Share Posted March 4, 2016 no havent got that far to put the charger on its very rich running Link to post Share on other sites
Bealieboy 1,625 Posted March 4, 2016 Report Share Posted March 4, 2016 no havent got that far to put the charger on its very rich running Things I would consider are:- So on the air/fuel side then, you've got to be looking at maf and/or lambda issues? Would either of these cause the rich running? Sent from my iPhone using Tapatalk Has it been timed wrong after the rebuild, causing starting issues and black smoke. Is it Possibly needing an immobiliser delete to cure the starting issue? Link to post Share on other sites
tonygti 22 Posted March 4, 2016 Author Report Share Posted March 4, 2016 lambda is brand new buddy so im going to eliminate the air mass next timing is spot on Bealieboy 1 Link to post Share on other sites
Recommended Posts