doxer79 0 Posted June 21, 2005 Report Share Posted June 21, 2005 i just had my vr pluged into vag com anf two fault codes came up :01247 Carbon Canister System Solenoid Valve No. 100533 idle regulation adaptation any one know what needs to be done to sort this out ? :! cheers Link to post Share on other sites
ingham 5 Posted June 21, 2005 Report Share Posted June 21, 2005 sorry not heard of that one beforeCarbon Canister System Solenoid Valve No. 1i think is on the side of the air fitler box and may be to do with idle (try a new valve)you can get one from a non vr6 Link to post Share on other sites
andy 0 Posted June 21, 2005 Report Share Posted June 21, 2005 The carbon cannister valve is indeed down behind the airbox, could be that it's been disconnected or contacts are bad. Give it a wiggle/clean, clear the faults and try again. Not sure about the idle regulation fault though. Link to post Share on other sites
doxer79 0 Posted June 21, 2005 Author Report Share Posted June 21, 2005 i dont have an airbox i have a bmc, would this be the reason for the fault or do i still have a carbon cannister? Link to post Share on other sites
ingham 5 Posted June 21, 2005 Report Share Posted June 21, 2005 do you still have crankcase vent vavle fitted? Link to post Share on other sites
andy 0 Posted June 21, 2005 Report Share Posted June 21, 2005 Its possible that your carbon cannister valve has been disconnected, some people do this if they remove the carbon cannister as part of BMC fitment. Link to post Share on other sites
doxer79 0 Posted June 22, 2005 Author Report Share Posted June 22, 2005 yeah i think it has been removed, so thats that one fault out the way! what the hell is 00533 idle regulation adaptation?? Link to post Share on other sites
ingham 5 Posted June 22, 2005 Report Share Posted June 22, 2005 maybe related Link to post Share on other sites
Recommended Posts