Factory33 10 Posted May 16, 2016 Report Share Posted May 16, 2016 Hi, name is chuff and i run a small and upcoming company called Factory33. We are big car nuts and we design and make high end custom car parts from mostly billet aluminium. one of our parts has received quite a lot interest from you members on facebook etc and so i was advised to set up a thread here to see if anyone would be interested in a group buy. The item in question is our custom design HT lead holders for the 2.8 VR. First off im sure youll all be thinking what is he rambling on about so heres a picture as you can see the lead holders bolt onto the original plastic cover mounting points so no drilling or fabrication required. You will need to remove your engine plastics as per our engine in the photo though, not a problem for most that want to go for a simple shaved bay show look. in the kit you get the upper holder ,the lower holder the fitting plate for the upper holder and all bolts etc. we have just completed manufacture of our first batch and half of those are sold already. the first batch have been made to accomodate 10mm leads (we only had 7mm leads on us at the time of these photos hence they look a little loose) but we will be doing other sizes in the future also. we are also looking at doing a version for those running shortrunners and turbo conversions etc as you can see from the photos we have our logo engraved on the upper piece and the VR6 logo engraved on the end of the lower piece. if VR6OC is interested in a group buy we may be able to look at doing your club logo in place of the VR6, if thats someting your interested in. as a kit they retail at £199.99 i know peoples first question will be how much will they be via a group buy but i need to know numbers before i can give you an accurate idea. so feel free to ask as many questions as possible and ill try to answer them. for reference they are fitted here to our very own VR6 swapped mk1 caddy. thanks for taking the time to look VR6 Supercharged, rich, Bealieboy and 1 other 4 Link to post Share on other sites
Bealieboy 1,625 Posted May 16, 2016 Report Share Posted May 16, 2016 These are still one of the best bay dress up kits I've seen for the vr, I spotted them on Instagram back in December. Very nice bit of kit! VR6 Supercharged and Factory33 2 Link to post Share on other sites
Factory33 10 Posted May 16, 2016 Author Report Share Posted May 16, 2016 1 hour ago, Bealieboy said: These are still one of the best bay dress up kits I've seen for the vr, I spotted them on Instagram back in December. Very nice bit of kit! Well thanks for the kind words, many many many hours has gone into them to be honest. Designing them so they are perfect fit and look classy. You would have seen the prototypes on our instagram in december Bealieboy and VR6 Supercharged 2 Link to post Share on other sites
bennyk 1,238 Posted May 16, 2016 Report Share Posted May 16, 2016 Id be all over this if I didn't have the Schrick they look amazing Link to post Share on other sites
Bealieboy 1,625 Posted May 16, 2016 Report Share Posted May 16, 2016 Yeah, me too, except for the schrick. Link to post Share on other sites
VR6CABBS 1,311 Posted May 16, 2016 Report Share Posted May 16, 2016 I'd be interested in being part of a group buy....... Factory33 1 Link to post Share on other sites
Factory33 10 Posted May 18, 2016 Author Report Share Posted May 18, 2016 On 16 May 2016 at 11:57 PM, VR6CABBS said: I'd be interested in being part of a group buy....... Okie doke Link to post Share on other sites
boab3 164 Posted May 19, 2016 Report Share Posted May 19, 2016 Nice!! Me too I'd be interested in group buy Link to post Share on other sites
Toddy 8 Posted May 20, 2016 Report Share Posted May 20, 2016 Add me to the group buy interest Link to post Share on other sites
D11PS 146 Posted May 20, 2016 Report Share Posted May 20, 2016 I'm in Link to post Share on other sites
boab3 164 Posted May 20, 2016 Report Share Posted May 20, 2016 Any billet oil dipsticks appearing in the near future? VR6 Supercharged 1 Link to post Share on other sites
Factory33 10 Posted May 21, 2016 Author Report Share Posted May 21, 2016 21 hours ago, boab3 said: Any billet oil dipsticks appearing in the near future? They are on our list but they wont be the next released part boab3 1 Link to post Share on other sites
Factory33 10 Posted May 21, 2016 Author Report Share Posted May 21, 2016 Group buy list VR6CABB Boab3 Toddy D11ps Link to post Share on other sites
Factory33 10 Posted May 24, 2016 Author Report Share Posted May 24, 2016 Any more for any more guys and gals? Link to post Share on other sites
Factory33 10 Posted May 25, 2016 Author Report Share Posted May 25, 2016 (edited) Right then guys and gals been speaking to the team and if we can get 5 people we can do each set for £190. + p&p.could also post em to one place and let you dish em out at a meet if thats better for you, would be cheaper on postage all round obviously. if they are all 10mm sets required then we have those currently in stock and could be dispatched as soon as payment is made. if you wanted (as a club ) say 10 sets they would be cheaper again and if people want the custom VR6OC logo then we would need to make a fresh batch custom for you guys obviously so there would be a lead time. Id appreciate your views Edited May 25, 2016 by Factory33 VR6 Supercharged and VR6Pete 2 Link to post Share on other sites
Factory33 10 Posted May 26, 2016 Author Report Share Posted May 26, 2016 Bump Link to post Share on other sites
matty.vrt 120 Posted May 26, 2016 Report Share Posted May 26, 2016 Wow, nice bit of kit. Wish these were about when I had my 12v. The packaging is really cool too. Factory33 1 Link to post Share on other sites
boab3 164 Posted May 27, 2016 Report Share Posted May 27, 2016 Anymore interested i can do with getting my set on there way Link to post Share on other sites
black dub 3 Posted May 27, 2016 Report Share Posted May 27, 2016 These look such high quality, really nice parts. Is there no way of making something like original to go over coilpack area Factory33 and VR6 Supercharged 2 Link to post Share on other sites
Factory33 10 Posted May 31, 2016 Author Report Share Posted May 31, 2016 On 27 May 2016 at 11:29 PM, black dub said: These look such high quality, really nice parts. Is there no way of making something like original to go over coilpack area This is something we are considering yes. but as a kit that piece isnt included currently Link to post Share on other sites
Factory33 10 Posted May 31, 2016 Author Report Share Posted May 31, 2016 On 27 May 2016 at 9:11 PM, boab3 said: Anymore interested i can do with getting my set on there way We have some sets ready for dispatch if you cant wait boab3 1 Link to post Share on other sites
Factory33 10 Posted June 4, 2016 Author Report Share Posted June 4, 2016 Right then guys and gals whats the plan with these, i have a set of 5 holders here to post out to you, do we have a 5th person now? Link to post Share on other sites
boab3 164 Posted June 4, 2016 Report Share Posted June 4, 2016 Pm me payment details etc shows are starting I need to get these fitted are they plain or etched? Cheers Factory33 1 Link to post Share on other sites
Factory33 10 Posted June 5, 2016 Author Report Share Posted June 5, 2016 On 4 June 2016 at 6:30 PM, boab3 said: Pm me payment details etc shows are starting I need to get these fitted are they plain or etched? Cheers Sorted sir Link to post Share on other sites
Recommended Posts