BeliRican 3 Posted August 20, 2016 Report Share Posted August 20, 2016 I want to go for as much power as possible, but all motor car. Will the 10.4 plugs wires help or it'll be the same if I buy the one on the picture I've been told I can relocate the sensor on the intake manifold in some were colder, can I put this into that hole the sensor will leave. This one is for the SAI Thanks Link to post Share on other sites
VR6Pete 1,455 Posted August 20, 2016 Report Share Posted August 20, 2016 Hey. You probably won't get anything with just updated plug cables. I've not heard of any mods to move the manifold temp sensor, although I have heard of swapping for a 1.8T. But again you are talking very little gains. Can you tell us more about any mods you've done ? You would be far better off at looking at mods like cam shafts, exhausts, intake etc with remap. Or things such as 3.68 final drive for gearbox or possibly forced induction. All depends what your end game is / how deep your pockets are.Pete Link to post Share on other sites
BeliRican 3 Posted August 21, 2016 Author Report Share Posted August 21, 2016 Thanks, I know it's no gain with that, but I were asking if it will be necessary the 10.4 wires I'm staying allmotor no force induction I'm not into speeding. My car is automatic. I'm installing an mk4 iat sensor on the airbox leave the old one in place but not connected. I'm installing a pipercross filter. 8mm wires, 2.5 straight exhaust everything deleted, cams, EPROM, cams, etc... Thanks a lot Link to post Share on other sites
VR6Pete 1,455 Posted August 21, 2016 Report Share Posted August 21, 2016 Don't bother with the 10.4 wires. Not needed. Just a good set of quality cables and spark plugs. Besides the 10.4 will not fit in the guides on the engine cover and look awful Link to post Share on other sites
BeliRican 3 Posted August 21, 2016 Author Report Share Posted August 21, 2016 Yes. You're right. Thanks a lot Link to post Share on other sites
Recommended Posts