Jump to content

Recommended Posts

Does anyone know if its plausable (and where to find adapters) for alloys that are 5x112 to 5x100 standard vw mk3?

Would i have scrubbing issues?

its only lowered 30mm all around but the rears sit quite low when i have passengers.

Link to post
Share on other sites

the pcd wont affect the wheels in anyway at all this is just the spacing between the wheel studs , the diameter and offset will tho as well as tyre width. adapters are available commercially i think , lookin a few mag adverts.

Link to post
Share on other sites

do you have adaptors on your RH rims? i have a set of rh zw1's that are 5x112 and i've got a set of adaptors (25mm) coming to the UK, but am unsure if its going to fit or not, i dont know the offset.

its 8x17....can anyone help me pleaseee!

Link to post
Share on other sites

yeah i got the adapters with the ZW1`s they just bolt straight to the hub (using your original 5x100 bolt holes) and then the alloys bolt straight to the adapter bolt holes making them 5x112, the adapters i got were wide, dunno what measurement they are but they sit inside the recess on the back of the ZW1`s they are wide though prob 25 mm or more maybe?, what make are the ones you ordered? i just ordered my kw highsport kit today so i will let you know what the clerance is like soooooon! looks to be plenty of room if i only go 40-50 on the front and 30-40 on the rear! at least if you got the wheels you could order them straight from RH ? or try getting the original rh ones of a guy called ingo knarr (german guy that speaks perfect english) at www.tunershop.co.uk where i got my RH rims from. !lol

Link to post
Share on other sites

they will probably be fine, as long as they make the right offset it will be cool, if the offset is wrong you will have a clearance problem either on suspension side or arch side, so be cautious when you fit them up and check the clearance while the cars still in the air, if any obvious problems you should see them before any damage occurs, once you have done it our cars will be twins mate!!!!

Link to post
Share on other sites
×
×
  • Create New...