24v ignition upgrades

[Timothy_Ellis 23]

What have you guys done to increase spark on your 24vs?

[dave_424 48]

Why do you need to increase spark? 

 

I've run 20psi of boost on stock coils with no problem 

[Timothy_Ellis 23]

Because more spark is always good.

[Timothy_Ellis 23]

Just because you're running 20psi doesn't mean you aren't missing something.

[dave_424 48]

Just now, Timothy_Ellis said:

Just because you're running 20psi doesn't mean you aren't missing something.

 

Wrong, if it's strong enough spark to ignite the mixture, that's all it needs to do. It either ignites or it doesn't, there is nothing in-between. You will see no appreciable gains from a stronger spark

[Timothy_Ellis 23]

Wrong. You know you can heat soak spark plugs and cause it to pre-ignite? And too weak of plugs can cause carbon deposits?

[Timothy_Ellis 23]

If you have nothing HELPFUL to say, get off my post.

[dave_424 48]

1 minute ago, Timothy_Ellis said:

Wrong. You know you can heat soak spark plugs and cause it to pre-ignite? And too weak of plugs can cause carbon deposits?

 

Lots of 'can' in those statements. If you're pre-igniting on stock hardware, you're doing something VERY wrong. 

 

If you want to waste money, then go right ahead. I recommend using 4 coils per cylinder and cleaning your plugs after every drive, wouldn't want to see carbon in an engine!